Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Room Temperature Cure
H-1 Hardener: Cures overnight at room temperature or 2 hrs at 65°C. Do not heat cure if the mass exceeds 200 grams.
H-18 Hardener: Cures overnight at room temperature or 2 hrs at 65°C. Do not heat cure if the mass exceeds 200 grams.
H-10LV Hardener: Cures overnight at room temperature or 3 hrs at 65°C. Do not heat cure if the mass exceeds 300 grams.- Mixing Instructions
Mix CC3-402 thoroughly in it’s shipping container to insure a uniform consistency. Weigh out the desired amount of resin in a clean container. Add the hardener accurately by weight in the proper proportion as specified above. (ie. 7.0 grams of H-1 Hardener and 100 grams of CC3-402 for a total mix of 107.0 grams) Mix thoroughly. Use in a well ventilated area and avoid contact with eyes and skin.
Properties
- Physical & Electrical Properties
| Value | Units | Test Method / Conditions | |
| Coefficient of Thermal Expansion | 42 x 10^(-6) | in/in/’C | — |
| Compressive Strength (25°C) | 43700.0 | psi | — |
| Dielectric Constant (25°C, 100 KC) | 3.9 | — | — |
| Dielectric Strength | 450 - 500 | volts/mil | — |
| Dissapation Factor (25°C, 100 KC) | 0.02 | — | — |
| Heat Distortion | 85.0 | °C | — |
| Izod Impact (of Notch) | 0.32 | ft lbs/in | — |
| Linear Shrinkage | 0.004 | in/in | — |
| Service Temperature (Continuous) | -55 - 155 | °C | — |
| Specific Gravity (Catalyzed, 25°C) | 1.45 | — | — |
| Specific Gravity (Uncatalyzed, 25°C) | 1.53 | — | — |
| Tensile Strength (25°C) | 9200.0 | psi | — |
| Thermal Conductivity | 0.32 | W/mK | — |
| Viscosity (Catalyzed, 22.5°C) | 1600.0 | cps | — |
| Viscosity (Uncatalyzed, 22.5°C) | 9600.0 | cps | — |
| Volume Resistivity (25°C) | 1016.0 | ohm-cm | — |
| Water Absorption (7 days, 25°C) | 0.3 | % | — |
Technical Details & Test Data
- Choice of Hardeners
- H-1 Hardener: Rigid, good dimensional stability, fast cure.
- H-18 Hardener: Resilient, excellent mechanical and thermal shock, low viscosity, good air release, fast cure.
- H-10LV Hardener: Variable hardness, excellent impact properties, long pot life
HARDENER PARTS BY WEIGHT PER 100 PARTS OF RESIN POT LIFE 100 GRAM 25°C (77°F) CURE TIME 25°C (77°F) CURE TIME 65°C (149°F) CURE TIME 125°C (257°F)
H-1 Hardener 7 1 hr. 24 hrs. 2 hrs. - - - H-18 Hardener 14.5 2 hrs. 24 hrs. 2 hrs. - - - H-10LV Hardener 20 (rigid) 3 hrs. 24 hrs. 3 hrs. - - - H-10LV Hardener 43 (semi-flex) 3 hrs. 24 hrs. 3 hrs. - - - H-10LV Hardener 65 (flexible) 3 hrs. 24 hrs. 3 hrs. - - -