Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Room Temperature Cure
- H-1 Hardener: Cures overnight at room temperature or 2 hrs at 65°C. Do not heat cure if the mass exceeds 200 grams.
- H-18 Hardener: Cures overnight at room temperature or 2 hrs at 65°C. Do not heat cure if the mass exceeds 200 grams.
- H-16 Hardener: Cures within 1 hour at room temperature or 30 minutes at 65°C. Do not heat cure if mass exceeds 100 grams.
- H-10LV Hardener: Cures overnight at room temperature or 3 hrs at 65°C. Do not heat cure if the mass exceeds 300 grams.
- Mixing Instructions
Mix CC3-402A-1 thoroughly in it’s shipping container to insure a uniform consistency. Weigh out the desired amount of resin in a clean container. Add the hardener accurately by weight in the proper proportion as specified above. (ie. 7.0 grams of H-1 Hardener and 100 grams of CC3-402A-1 for a total mix of 107.0 grams) Mix thoroughly. Use in a well ventilated area and avoid contact with eyes and skin.
Properties
- Flame Rating
- Physical & Electrical Properties
Value | Units | Test Method / Conditions | |
Coefficient of Thermal Expansion | 31 x 10^(-6) | in/in/’C | — |
Compressive Strength (25°C) | 41000.0 | psi | — |
Dielectric Constant (25°C, 100 KC) | 4.2 | — | — |
Dielectric Strength | 500.0 | volts/mil | — |
Dissapation Factor (25°C, 100 KC) | 0.02 | — | — |
Glass Transistion Temperature (Tg) | 125.0 | °C | — |
Heat Distortion | 115.0 | °C | — |
Izod Impact (of Notch) | 0.32 | ft lbs/in | — |
Linear Shrinkage | 0.003 | in/in | — |
Service Temperature (Continuous) | -55 - 130 | °C | — |
Specific Gravity (25°C) | 1.5 | — | — |
Tensile Strength (25°C) | 9840.0 | psi | — |
Thermal Conductivity | 1.12 | W/mK | — |
Volume Resistivity (25°C) | 1016.0 | ohm-cm | — |
Water Absorption (7 days, 25°C) | 0.04 | % | — |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Choice of Hardeners
- H-1 Hardener: Rigid, good dimensional stability, fast cure.
- H-18 Hardener: Resilient, excellent mechanical and thermal shock, low viscosity, good air release, fast cure.
- H-16 Hardener: Rigid, good low temperature and high humidity application, fast cure.
- H-10LV Hardener: Variable hardness, excellent impact properties, long pot life
HARDENER PARTS BY WEIGHT PER 100 PARTS OF RESIN POT LIFE 100 GRAM 25°C (77°F) CURE TIME 25°C (77°F) CURE TIME 65°C (149°F) CURE TIME 125°C (257°F)
H-1 Hardener 7 1 hr. 24 hrs. 2 hrs. - - - H-18 Hardener 14.5 2 hrs. 24 hrs. 2 hrs. - - - H-16 Hardener 11 26 min. 1 hr. 30 min. 10 min. H-10LV Hardener 20 (rigid) 3 hrs. 24 hrs. 3 hrs. - - - H-10LV Hardener 43 (semi-flex) 3 hrs. 24 hrs. 3 hrs. - - - H-10LV Hardener 65 (flexible) 3 hrs. 24 hrs. 3 hrs. - - -