Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Surfaces Where Sealer 444 Excels
- High Traffic Areas: SEALER 444 provides a tough and durable barrier to protect high traffic areas from dirt, spills, and stains.
- Very Porous Surfaces: Porous surfaces absorb stains very easily. SEALER 444’s protective coating inhibits absorption by porous material.
- Outdoor Surfaces: SEALER 444 excels against the constant threats faced by outdoor surfaces. SEALER 444 protects from the effects of weathering, rain, and UV damage.
Applications & Uses
- Markets
- Applications
- Application Area
- Recommended Surfaces
- Mexican Saltillo
- Travertine
- Unglazed Tile
- Terrazzo
- Stone, Brick, & Clay Pavers
- Any surface where gloss desired
- Coverage
- For very porous surfaces: 1st coat: 75-150 sq. ft./gallon. 2nd coat 150-300 sq. ft./gallon.
- For average density surfaces: 1st coat: 200-300 sq. ft./gallon. 2nd coat 400+ sq. ft./gallon
- Generally, the sealer will go twice as far on the 2nd coat as it did on the 1st coat.
- Wait 6-12 hours between coats to ensure the previous one is completely dry.
- Surface Preparation
Always be sure surface is clean, dry, and free from any dirt, grease, oil, wax, or other contaminant. Read the entire label before using. Use only as directed. Always test on a small piece of material or a small inconspicuous area to determine suitability. Ensure the area is well ventilated. Ideal surface temperature should be between 60°F and 80°F. Product works best when it is the first substance applied to the surface, insuring proper penetration.
- Applications
SEALER 444 may be applied with spray applicator, brush, roller, or lint free rag. Apply the first coat liberally to ensure proper penetration, bonding, and to provide a good base. Avoid puddles by wiping up excess.
- For Sealing Grout Joints: Apply to joint with small brush or squeeze bottle. Allow to soak 10-15 mins. Wipe off excess from tile surface. Do not leave voids and puddles.
- Smooth Surfaces: apply 444 with a lint free cloth, spray applicator or short nap roller.
- Rough Surfaces: apply with a ½ to ¾ inch nap paint roller or paint brush.
Properties
- Color
- Typical Properties
| Value | Units | Test Method / Conditions | |
| VOC Content | 0.068 | lb/gal | — |
Safety & Health
- First Aid Measures
- Eye Contact: Flush eyes with water. Seek medical attention if irritation persists.
- Skin Contact: Wash with soap and water. Seek medical attention if irritation persists.
- Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Immediately seek medical professional. Never give anything by mouth to an unconscious person. Rinse mouth with water. Seek medical attention if symptoms appear.
Packaging & Availability
- Packaging Information
- 1 qt: 12 units per case (28lbs)
- 1 gallon, 6 units per case (56lbs)
- 5 gallon, (49lbs)
- 55 gallon, (560lbs)
Storage & Handling
- Storage and Handling
- Handling: Do not get in eyes. Keep container closed and tightly sealed when not in use.
- Conditions for safe storage: Keep in tightly closed, properly labeled containers. Keep in a cool, well-ventilated place.