Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
- Good adhesion to difficult substrates.
- Depending on substrates, this product can allow bonds with heat resistance up to +65°C and cold resistance down to -40°C.
- This product compared to EVA adhesive has an improved thermal stability, stays constant in its viscosity, therefore no changes in the adhesion and in the processing quality, even by longer rests in the adhesive melting machines.
- Low consumption adhesive, with extremely low density.
- Odor and smoke free.
- Adhesive free from organic solvents.
Applications & Uses
- Markets
- Application Method
- Application
- For use in nozzle, roller or other applicator system.
- Temperatures above 190 °C should be avoided.
- The equipment needs to be freed from EVA hot melt and cleaned since this product is not compatible with EVA based hot melts.
- During extended machine stops it is recommended to switch off the heating.
- Cleaning
While hot by scrapping with a spatula and remove any rests with Hot-Melt Cleaners CC02.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Base | Synthetic Resins | - | - |
Viscosity (160°C) | 1040 - 1560 | mPa.s | ASTM D.3236, (Brookfield, Thermosel System) |
Softening Point | 100 - 110 | - | ASTM E.28 (R&B) |
Density | approx. 0.92 | - | MC206 |
Open Time (160°C) | 9.0 - 10.0 | s | MC 129 |
Setting Time (160°C) | 4.0 - 5.0 | s | MC 129 |
Heat Resistance (1kgf/25mm) | 65.0 | °C | MC218 (SAFT) |
Recommended Working Temperature | 150 - 180 | °C | - |
Regulatory & Compliance
- Certifications & Compliance
- Regulatory & Compliance
All components comply with paragraph 21CFR175.105 of FDA Legislation.
Packaging & Availability
- Availability
Small pillows, approx. 20g.
Storage & Handling
- Storage & Handling
- Store in a dry and cool place.
- Storage life - At least 2 years according to our experience.