Products

CENTROLEN / PP-H is a semi-crystalline thermoplastic, but possesses higher resistance, stiffness and melting temperature with low density. The dynamic stability is equally high. PP-H is applicable within a temperature range of +2 to 130 °C. PP-H is used in apparatus engineering and in the chemical industry. The BfR-/FDA approval assures physiological safety. PP-H is available in the colors natural and gray.

CENTROMID 12 LE / PA 12 LE soft-plastics are often used as flexible hoses for screw and spiral conveyors in the food industry. During the modification with PA 12 LE soft, a special “food compliant” softener is added to the basic polyamide 12 polymer. The modification is also food safe. The resistance of the binding substance is reduced, the application temperature decreases to 130 °C. The tensile strength is reduced to 350 MPa.

CENTROMID 12 GF / PA 12 GF 30 is reinforced with 30% glassfibres. This leads to stiffness and increased resistance in the binding substance and an increased heat distortion resistance at the same time. The impact strength is reduced, the tensile strength is increased up to 6.000 MPa. PA 12 GF 30-plastics are often used as lever or valve components.

CENTROMID 6 E FG / PA 6 E FG is a high crystalline thermoplastic, which is comprised of one basic unit. The number 6 indicates the number of C-atoms of the basic molecular structure. PA 6 E FG possesses high toughness and heat stability. A high elastic-module is reached through hydrogen binding. PA 6 E FG is applicable within a temperature range of -40 to +160 °C. PA 6 E FG-parts are often used as bearings, gear wheels, rollers or seals. The EU-VO 10/2011-/FDA approval assures physiological safety. PA 6 E FG is available in the color natural.

CENTROMID 6 E / PA 6 E is a high crystalline thermoplastic, which is comprised of one basic unit. The number 6 indicates the number of C-atoms of the basic molecular structure. PA 6 E possesses high toughness and heat stability. A high elastic-module is reached through hydrogen binding. PA 6 E is applicable within a temperature range of -40 to +160 °C. PA 6 E-parts are often used as bearings, gear wheels, rollers or seals. The BfR-/FDA approval assures physiological safety. PA 6 E is available in the colors natural and black.

CENTROMID 6.6 / PA 6.6 is a high crystalline thermoplastic, which is comprised of two basic units. The number 6.6 indicates the number of C-atoms of both basic structures of the molecules. PA 6.6 possesses an increased resistance to toughness and wear, as well as an increased resistance to abrasion. Excellent toughness is given even in low temperatures. PA 6.6 is applicable within a temperature range of -30 to +180 °C. PA 6.6 plastics are often used as track rollers, rope pulleys or gear racks. The BfR-/FDA approval assures physiological safety. PA 6.6 is available in the colors natural and black.

CENTROMID 12 / PA 12 is a high crystalline thermoplastic, which is comprised of one basic unit. The number 12 indicates the number of C-atoms of the basic molecular structure. PA 12 possesses high impact strength and only absorbs little moisture. The chemical resistance is improved. PA 12 is applicable to up to 150 °C. PA 12-plastics are often used as prec ision or drive components. The BfR-/FDA approval assures physiological safety. PA 12 is available in the colors natural and black.

CENTROLEN / PE-HD is a semi-crystalline thermoplastic, which distinguishes itself through its high resistance to stress cracking and chemical stability. PE-HD is applicable within a temperature range of -75 to +120 °C. The plastic, belonging to the group of polyolef ines, is water repellent and non-swelling. Due to its low density and excellent machinability, PE-HD is often used in the machinery and food industry. PEHD is available in the colors natural and black, as well as in custom colors upon request.

CENTROLEN / PE-UHMW is polymerised with a modified Ziegler-Catalyst. The density is lowered and the sliding friction coefficient is improved. PE-UHMW distinguishes itself through its very high impact resistance and abrasion resistance. The BfR-/FDA approval assures physiological safety. Sliding guides or pump and wear parts are often manufactured from PE-UHMW.