Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Advantages
- Non-yellowing on exposure to ultraviolet.
- Non fading. Resists cracking, peeling or flaking.
- Prevents or greatly reduces efflorescence, spalling and staining.
- A water resistant film. Bridges minor cracks and voids to repel water.
- Excellent resistance to strongest cleaning agents, alkalies, mild acids, grease, oil and most chemicals.
- Penetrates deep into substrate to improve resistance to weather erosion.
- Allows masonry to breathe. Good moisture and vapor transmission.
- Ready to use - One part system.
Applications & Uses
- Applications
- Application Area
- Applications
- All surfaces should be clean and structurally sound.
- Remove dust, dirt and atmospheric contamination.
- Repair voids and cracks. Repoint and recaulk as required.
- Surface must be dry. Temperature should be a minimum of 40oF.
- Application may be made with brush, roller or spray.
- Application must be made in an even, saturating manner.
- Avoid excessive run down, draping or overlapping.
- Protect shrubbery and glass from over-spray.
- Test panels should be made prior to full scale application to determine material type, rate of application, number of coats and method of application best suited to job conditions.
- Limitations
- Do not apply on rainy days or to wet or damp surfaces.
- Any existing sealers or paints need to be thoroughly removed.
- Extreme temperatures or humidity may affect final appearance.
- It is recommended that a test area be done for every application.
- Finishes & Clean Up
Finishes: Gloss, semi-gloss or flat.
Clean Up: Sox Solvent, xylene or mineral spirits formulations available passing FDA specifications and Rule 66 solvent, Clean Air Standards, Ecology Safe Grade.
Properties
- Color
- Typical Properties
Value | Units | Test Method / Conditions | |
pH | Neutral | — | — |
Sward Hardness (Overnight) | 50.0 | — | — |
Tukon Hardness (One Week) | 12.6 | — | — |
Knife Adhesion (One Week) | Very good | — | — |
Tack Free Time (22.5% Solids Content) | 15 | minutes | — |
Outdoor Exposure Rating (Portland Cement Association) | Excellent | — | — |
Oxidation Stability | Test Exceeds | — | ASTM D-525-53T |