Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Industrial Additives Functions
- Technologies
Features & Benefits
- Labeling Claims
- Industrial Additives Features
- Advantages
- Significant hand-feel improvements can be obtained in the finished tissue product.
- The release effect is superior to that of the CP Debond 637 due to its silicone softening content. The release effect will ultimately depend on the coating/release package used.
- ChemPro recommends using a CP Coat 750 / CP Release 830 package.
Applications & Uses
- Markets
- Applications
- Industrial Additives End Use
- Applications
CP Debond 651 & 652 are designed to reduce tensile strength of the pulp while greatly improving softness in production of facial and toilet tissue.
Dilution to 1% or less before addition is recommended. This product has good dispersibility in hot or cold water. CP Debond 651 & 652 must be warmed to the minimum of 40 C to allow pumping for bulk handling. Application of 0.1 to 0.2% of CP Debond 652 per dry pulp gives good results (1 – 2 kg/MT).
Normally the increase in hand-feel (surface smoothness and flexibility) is accompanied by a loss of tensile strength, as strength and softness tend to be inversely related in tissue paper products, all other factors such as basis weight etc, being equal.CP Debond 651 & 652, cationic debonders with silicone softening effect, are added to the pulp before it reaches the head-box. ChemPro furthermore offers lotions (CP-soft 60 and 90 series) that are applied in the converting process rather than on the paper machine.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Active Content | 89 - 99 | % | — |
| Viscosity | 300 - 800 | mPa.s | — |
| Density (at 20°C) | 1 | g/cm³ | — |
| pH | 4 - 7 | — | — |
Regulatory & Compliance
- Regulatory Status
- CP Debond 651 & 652 conform to the State of California Proposition 65 legislation. Components of CP Debond 651 & 652 are not listed in hypoallergenic products formula review prohibited list.
Safety & Health
- Health Safety & Environment
- CP Debond 651 & 652 are not toxic. If spilt on bare skin wash with soap and water. If the product comes in contact with eyes rinse immediately with plenty of water for at least 15 min and seek medical advice if discomfort persists. Before handling this material, read the corresponding Safety Data Sheet for health, safety and environment.
Packaging & Availability
- Packaging Type
- Commercial Information
- CP Debond 651 & 652 are delivered in plastic 200 liters drums or on request in tote tanks.
Storage & Handling
- Shelf Life
- 12 Months
- Storage Details
- CP Debond 652 should be stored in closed containers such as tote tanks or drums, at temperature between +5°C and +35°C.