Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Industrial Additives Functions
- Technologies
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
- CP Debond 637 Debonding Agent is designed to reduce tensile strength of the pulp while improving softness and hand feel of facial and toilet tissue. All our debonders are cationic and are added to the pulp before it reaches the headbox. They can be combined with CP Soft 100A to increase the softening effect. Significant hand feel improvements are obtained in the finished tissue product. The release effect is low to medium depending on which debonder is used. A synergystic relationship is obtained when using a CP Debond product together with a spray of CP Soft 100A on the felt.
- Advantages
- Significant hand-feel improvements can be obtained in the finished tissue product.
- The release effect is low compared to competitive products but depends on the Yankee coating/release package that is used. For this reason ChemPro recommends to use the CP Coat 750 adhesive with CP Soft 100A.
- A synergistic relationship is obtained when using the cationic CP Debond 637 together with a spray of CP Soft 100A on the felt
Applications & Uses
- Markets
- Applications
- Industrial Additives End Use
- CP Debond 637 Debonding Agent
- CP Debond 637 is a concentrated mix of cationic fatty polyamide amine polymer with emulsifiers.
- Applications
CP Debond 637 is designed to reduce tensile strength of the pulp with improved softness in production of facial and toilet tissue. Dilution to 1% or less before addition is recommended. This product has good dispersibility in hot or cold water. CP Debond 637 must be warmed to the minimum of 40 C to allow pumping for bulk handling. Application of 0.1 to 0.2% of CP Debond 637 per dry pulp gives good results ( 1 – 2 kg/MT ).
Normally the increase in hand-feel (surface smoothness and flexibility) is accompanied by a loss of tensile strength, as strength and softness tend to be inversely related in tissue paper products, all other factors, such as basis weight etc, being equal.
CP Debond 637, a cationic debonder with softening effect, is added to the pulp before it reaches the head-box. It can be combined with CP-soft 100A to increase the softening effect.CP-soft 100A is a water soluble silicone that can be sprayed on the felt prior to the suction press. ChemPro furthermore offers lotions (CP-soft 60 and 90 families) that are applied in the converting process rather than on the paper machine.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Active Content | 89-99 | % | — |
| Density (at 20°C) | 1 | g/cm³ | — |
| Viscosity | 300 - 800 | mPa.s | — |
| pH | 4 - 7 | — | — |
Regulatory & Compliance
- Certifications & Compliance
- Regulatory Status
- CP Debond 637 conforms to the State of California
- Proposition 65 legislation.
- Components of CP Debond 637 are not listed in
- hypoallergenic products formula review prohibited list.
Safety & Health
- Health Safety & Environment
- CP Debond 637 is not toxic. If spilt on bare skin wash with soap and water. If the product comes in contact with eyes rinse immediately with plenty of water for at least 15 min and seek medical advice if discomfort persists. Before handling this material, read the corresponding Safety Data Sheet for health, safety and environment.
Packaging & Availability
- Commercial Information
- CP Debond 637 is delivered in plastic 200 liter drums or on request in tote tanks.
Storage & Handling
- Shelf Life
- 12 Months
- Storage Details
- CP Debond 637 should be stored in closed containers such as tote tanks or drums, at temperature between +5°C and +35°C.