ChemPro CR Lube Lubricants - Lubricant (External)

Knowde Enhanced TDS

Identification & Functionality

Plastics & Elastomers Functions: Lubricant (External),
Lubricant (Internal),
Mold Release Agent,
Release Agent
Technologies: Elastomers
Product Families: Elastomers — Elastomer Additives
Performance Additives,
Processing Aids

Features & Benefits

Labeling Claims: Biodegradable,
Non-Toxic
Materials Features: Biodegradable,
Excellent Lubricity,
Good Mold Release,
Good Smoothness,
Good Stability,
Non-Toxic,
Uniform Distribution,
Water Soluble
Product Highlights: ChemPro has acquired extensive knowledge and technical experience in rubber release technology. Our release agents, slab-dips have been developed following advanced testing methods. They are made of prime grade ingredients. Our releases may be further formulated depending on your application and industrial process.
Advantages: Effective release for a wide range of rubber products

Excellent stability and uniformity

Water miscible

Applications & Uses

Applications: CR Lube compounds are semi-permanent mold releases used in rubber molding operations. Typically they are diluted up to 40 times their volume in soft water. Both concentrated and diluted products should be well mixed before applying to the molds. CR Lube compounds need to be applied to the mold prior to the warm-up cycle in order to allow the product to cure. Several light applications while allowing time to dry will give better results than one heavy application.

Properties

	Value	Units	Test Method / Conditions
Active Content	12 - 25	%	—
pH	7 - 9	—	—

Regulatory & Compliance

Certifications & Compliance: California Proposition 65
Regulatory Status: CR Lube compounds are largely inert.

CR Lube compounds conform to the State of California Proposition 65 legislation.

Safety & Health

Health Safety & Environment: CR Lube compounds are not toxic.

They are 100% biodegradable.

If spilt on bare skin wash with soap and water.

If the product comes in contact with eyes rinse immediately with plenty of water for at least 15 min and seek medical advice if discomfort persists.

Before handling this material, read the corresponding Safety Data Sheet for health, safety and environment.

Packaging & Availability

Storage & Handling

Shelf Life: 12 Months
Storage Details: CR Lube should be stored in closed containers such as tote tanks, drums or pails at temperatures between +5°C and +35°C. Shelf life is 12 months.