Knowde Enhanced TDS
Identification & Functionality
- Base Oil Type
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- It is designed to creep into internal workings of chains, cables, needle bearings, and sliding mechanisms.
- 650 AML penetrates deep into valves, pistons, and other pneumatic components to protect against friction and wear, resulting in smoother and more efficient operation.
- 650 AML absorbs moisture from the air lines to reduce corrosion of the pneumatic components.
- 650 AML cleans as it lubricates. Inherent detergency in this lubricant disperses dirt and debris, and removes gums and varnish. As a result, equipment is protected from abrasive wear. This advantage can prolong the life of mechanical equipment, chains, and cables.
- Chesterton 650 AML improves the efficiency of automatic lubrication systems by eliminating trace moisture and contaminants from distribution lines, controls, and components.
- 650 AML is NSF H1 certified and is free of any animal fats, oils, and animal derived by-products. It is worker safe and a has low oil mist hazard. Before
- Key Features and Benefits
- Biodegradable
- Environmentally safe ester technology.
- Low mist hazard, low odor.
- Self-cleaning, removes residue and sticky build up.
- Low friction, significantly reduces power consumption.
- Reduces wear, prolongs equipment life.
- High load and extreme pressure capabilities.
- Silicone-free
- Safe on all metals, most polymers and plastics.
- NSF H1 certified
Applications & Uses
- Applications
- Application Area
- Directions
Chesterton® 650 AML can be applied from bulk container, central lubrication equipment or standard air mist lubrication systems.
- Application Areas
- Air Actuated Valves
- Pneumatic Cylinders, Solenoids and Positioners
- Conveyor Chains, Slideways, and Wire Ropes
- Air Mist or Oil Injected Lubricated Bearings, and Equipment
- Assembly, Packaging and Filling Machines
- Environmental Guidance
Biodegradability
- OECD 301 A: 91.25% degradable in 28 days
- OECD 301 B: 68.55% degradable in 28 days
Properties
- Physical Form
- Appearance
- Clear, amber liquid
- Physical Properties
| Value | Units | Test Method / Conditions | |
| Coefficient of Friction (Pin and Vee Block) | 0.05 | - | ASTM D 3233 |
| Copper Strip Corrosion (24 hrs, 100°C) | 1A/1B | - | ASTM D 130 |
| Failure Load (Pin and Vee Block) | max. 17587 | N | ASTM D 3233 |
| Flash Point | 211.0 | °C | ASTM D 93 |
| Four Ball EP Test (10 s, 27°C, 1765 RPM Weld Load) | 1961.0 | N | ASTM D 2783 |
| Four Ball Wear Test (1 hr, 75°C, 1200 RPM, 40 kg Scar Diameter) | 0.395 | mm | ASTM D 4172 |
| ISO VG | 22.0 | - | ASTM D 2422 |
| Operating Temperature | -21 - 200 | °C | - |
| Pour Point | -21 | °C | ASTM D 97 |
| Torque (Pin and Vee Block) | 4.61 | N-m | ASTM D 3233 |
| Viscosity (100°C) | 4.9 | cSt | ASTM D 445 |
| Viscosity (40°C) | 20.4 | cSt | ASTM D 445 |
| Viscosity Index | 176.0 | - | ASTM D 2270 |
| Water Separability of Oil (54ºC, Oil - Water - Emulsion) | 0 - 0 - 80 | - | ASTM D 1401 |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Compatibility Chart
Materials Rating Polyurethane (PU) EC Fluorinated rubber (FKM) EC Propylene-tetrafluoroethylene rubber (FEPM) EC Perfluoroelastomer (FFKM) EC Nitrile (NBR) EC Polytetrafluoroethylene (PTFE) EC Ethylene-propylene-diene rubber (EPDM) NC Rating Key:
The materials were soaked in 650 AML at 70ºF for 70 hours.
EC - Excellent Compatibility (Less than 5% change in dimensions, weight, and durometer.)
NC - Not Compatible (More than 15% change in dimensions, weight, and durometer.)
Packaging & Availability
- Packaging
- 475 ml
- 20 L
- 208 L