Products

CHT Group

TransportationApplications

Aerospace & Aviation

20 Products found on CHT Group in Transportation

TDSWith TDS

CHT Group QSil 223

Product Type:Encapsulant, 2K (2 component) Adhesive, Potting Compound
Application Area:Sensors, Aerospace Applications, LEDs, Optical Applications
Cure Method:Chemical Cure
Chemical Family:Silicones

CHT Group QSil 223 is a transparent and colorless silicone formulation that is ideal for optical applications. Its viscosity profile enables excellent flow around components, and it is excellent for potting complex parts. The chemical composition results in a cured product that is hydrolytically stable as well as reversion-resistant. The silicone elastomer provides electrical insulation and physical shock resistance for components and enables environmental protection.

CHT Group QSil 559

Product Type:Potting Compound, Encapsulant, Solvent free (100% Solids) Adhesive, 2K (2 component) Adhesive
Application Area:Aerospace Applications
Cure Method:Chemical Cure
Chemical Family:Silicones

CHT Group QSil 559 is a 100% silicone solid elastomer designed for electrical potting applications. This addition-cure potting material is a two-component system that has a long gel time. It offers a hard, thermally conductive, low-modulus material that is readily repairable.

CHT Group SE3000

Product Type:Encapsulant, 2K (2 component) Adhesive, Potting Compound
Application Area:Passenger Protection System, PTC Heater, Electric Motors, EV Charging Stations, Battery Management System (BMS), LEDs, Driving Support System, Inverter, Brake System, On-board Charger, Control Units, ADAS (Advanced Driver Assistance Systems), Electric Vehicle (EV) Batteries, Automotive Converter
Cure Method:Chemical Cure
Chemical Family:Silicones

CHT Group SE3000 is a 2-component silicone elastomer system specially designed for electronic potting and encapsulation applications. It offers good protection against chemicals, environmental contamination, mechanical shock, vibration, and impact damage. It can be employed in areas where low flammability is a prerequisite. The cured elastomer can be repaired. The component parts have relatively low viscosities and are readily mixed, either by hand or machine.

CHT Group QSil 553

Product Type:Encapsulant, 2K (2 component) Adhesive, Potting Compound, Solvent free (100% Solids) Adhesive
Application Area:Electronic Control Units, Aerospace Applications, Insulators
Cure Method:Chemical Cure
Chemical Family:Silicones

CHT Group QSil 553 is a 2-component silicone elastomer system specially designed for electronic potting and encapsulation applications. It offers good protection against chemicals, environmental contamination, mechanical shock, vibration, and impact damage. It can be employed in areas where low flammability is a prerequisite. The cured elastomer can be repaired. The component parts have relatively low viscosities and are readily mixed, either by hand or machine.

CHT Group QSil 214

Product Type:Encapsulant, 2K (2 component) Adhesive, Potting Compound
Application Area:Sensors, Aerospace Applications, LEDs, Optical Applications
Cure Method:Chemical Cure, Air Dry
Chemical Family:Silicones

CHT Group QSil 214 is a transparent and colorless silicone formulation that is ideal for optical applications. Its viscosity profile enables excellent flow around components, and it is excellent for potting complex parts. The chemical composition results in a cured product that is hydrolytically stable as well as reversion-resistant. The silicone elastomer provides electrical insulation and physical shock resistance for components and enables environmental protection.

CHT Group TufGel 330

Product Type:Encapsulant, 2K (2 component) Adhesive, Potting Compound
Application Area:Sensors, Passenger Protection System, Control Units, ADAS (Advanced Driver Assistance Systems), Battery Management System (BMS), Electric Vehicle (EV) Batteries, Driving Support System
Cure Method:Chemical Cure
Chemical Family:Silicones

CHT Group TufGel 330 is one of a family of soft, adherent, silicone elastomeric gels designed for the encapsulation and protection of electronic components. It is a low-viscosity, two-component system that is readily mixed in a 1:1 ratio. It is used to provide protection from vibration, thermal or mechanical shock, water, and many other environmental contaminants. This product has excellent dielectric properties.

CHT Group QSil 220

Product Type:Encapsulant, 2K (2 component) Adhesive, Potting Compound
Application Area:Aerospace Applications, Optical Applications
Cure Method:Heat Cure, Chemical Cure
Chemical Family:Silicones

CHT Group QSil 220 is a transparent and colorless silicone formulation that is ideal for optical applications. Its viscosity profile enables excellent flow around components, and it is excellent for potting complex parts. The chemical composition results in a cured product that is hydrolytically stable as well as reversion-resistant. The silicone elastomer provides electrical insulation and physical shock resistance for components and enables environmental protection.

CHT Group QGel 311

Product Type:Encapsulant, 2K (2 component) Adhesive, Potting Compound
Application Area:Sensors, Passenger Protection System, Control Units, ADAS (Advanced Driver Assistance Systems), Driving Support System
Cure Method:Chemical Cure, Air Dry
Chemical Family:Silicones

CHT Group QGel 311 is a clear, soft, moderately cross-linked, general-purpose, addition-cure silicone gel polymer. This silicone gel provides protection from moisture, vibration, thermal, or mechanical shocks. It is a fast-curing, inhibition-resistant gel that is commonly used in a variety of electronic applications.

CHT Group TufGel 336

Product Type:Potting Compound, Encapsulant, 2K (2 component) Adhesive
Application Area:Aerospace Applications
Cure Method:Chemical Cure
Chemical Family:Silicones

CHT Group TufGel 336 is one of a family of soft, adherent, silicone elastomeric gels designed for the encapsulation and protection of electronic components. It is a low-viscosity, two-component system that is readily mixed in a 1:1 ratio. It is used to provide protection from vibration, thermal or mechanical shock, water, and many other environmental contaminants. This product has excellent dielectric properties.

Silcoset 158

Chemical Family:Silicones
Product Type:1K (1 component) Sealant, 1K (1 component) Adhesive
Application Area:Aerospace Applications, Form In Plastic Gaskets (FIPG), Ovens
Application Method:Gun, Pneumatic Gun
Compatible Substrates & Surfaces:Enamel, Thermoplastics, Glass, Steel, Ceramic, Thermosetting Plastics, Wood, Metal, Non-ferrous Metal, Aluminum, Ceramic Fabrics
Features:Room Temperature Vulcanizing, Good Weather Stability, Improved Ageing Resistance, Fast Cure, Room Temperature Curing, Good Adhesion, Excellent Multi-Substrate Adhesion, Primerless

Silcoset 158 is a solvent-free, 1-part RTV (Room Temperature Vulcanizing) silicone adhesive sealant within the acetoxy cure product line. This versatile adhesive exhibits excellent primer-less adhesion to diverse substrates, including aluminum, non-ferrous metals, steel, glass, enameled surfaces, fabrics, ceramics, thermosetting, thermoplastics, and wood. It is highly resistant to weathering and aging. In contact with atmospheric moisture, it cures rapidly at room temperature. Silcoset 158 streamlines your bonding projects.

CHT Group SilSo Bond 14000

Product Type:Solvent free (100% Solids) Sealant, 1K (1 component) Sealant
Application Area:Control Units, ADAS (Advanced Driver Assistance Systems), Electric Vehicle (EV) Batteries, Automotive Converter, Sensors, Gaskets, Passenger Protection System, PTC Heater, Electric Motors, EV Charging Stations, Battery Management System (BMS), LEDs, Driving Support System, Electrical Components, Inverter, Seals, Brake System, Air Circulation System, On-board Charger
Compatible Substrates & Surfaces:Metal, Polycarbonate (PC), Copper
Cure Method:Air Dry, Moisture Cure
Application Method:Gun
Chemical Family:Silicones

CHT Group SilSo Bond 14000 is a non-corrosive, neutral-cure, 1-part, RTV (Room Temperature Vulcanizing) silicone adhesive sealant. It is one in a range of alkoxy cure products that are solvent-free. It exhibits excellent primerless adhesion to many substrates and cures at room temperature to form a tough rubber when in contact with atmospheric moisture. This product will not corrode copper or its alloys and is suitable for use with electronic components.

CHT Group AS1803

Product Type:Solvent free (100% Solids) Sealant, 1K (1 component) Sealant
Application Area:Automotive Converter, Sensors, Passenger Protection System, PTC Heater, Electric Motors, EV Charging Stations, Battery Management System (BMS), LEDs, Driving Support System, Inverter, Brake System, On-board Charger, Aerospace Applications, Control Units, ADAS (Advanced Driver Assistance Systems), Electric Vehicle (EV) Batteries
Cure Method:Air Dry, Moisture Cure
Application Method:Gun
Chemical Family:Silicones

CHT Group AS1803 is a non-corrosive, neutral-cure, 1-part, RTV (Room Temperature Vulcanizing) silicone adhesive sealant. It is one in a range of acetone-cure products that are solvent-free. It exhibits excellent primerless adhesion to many substrates and cures rapidly at room temperature to form a tough rubber when in contact with atmospheric moisture. This product will not corrode copper or its alloys and is suitable for use with electronic components.

CHT Group ACC15

Product Type:Conformal Coating, Solventless & High Solids Coating, 1K (1 component) Coating
Features:Excellent Transparency Properties, Low Viscosity, Good Toughness, High Solids Content, Low Odor, Excellent Substrate Adhesion
Application Area:ADAS (Advanced Driver Assistance Systems), Printed Circuit Boards, Aerospace Applications, Control Units, Battery Management System (BMS), Passenger Protection System, Electric Vehicle (EV) Batteries, Driving Support System
Application Method:Brush, Dip Coating, Spray
Chemical Family:Silicones

CHT Group ACC15 is a low-viscosity, 1-component, condensation-curing silicone coating. The uncured product can be applied by pouring or brushing and is readily cured into a tough, transparent rubber. It can be used to coat printed circuit boards to prevent the ingress of water and environmental contaminants.

CHT Group AS1707

Product Type:Solvent free (100% Solids) Sealant, 1K (1 component) Sealant
Application Area:Automotive Converter, Sensors, Electronic Control Units, Passenger Protection System, PTC Heater, Electric Motors, EV Charging Stations, Battery Management System (BMS), Driving Support System, Inverter, Brake System, On-board Charger, Aerospace Applications, Control Units, ADAS (Advanced Driver Assistance Systems), Electric Vehicle (EV) Batteries
Cure Method:Moisture Cure
Application Method:Gun
Chemical Family:Silicones

CHT Group AS1707 is a non-corrosive, neutral-cure, 1-part, RTV (Room Temperature Vulcanizing) silicone adhesive sealant. It is one in a range of alkoxy cure products that are solvent-free. It exhibits excellent primerless adhesion to many substrates and cures at room temperature to form a tough rubber when in contact with atmospheric moisture. This product will not corrode copper or its alloys and is suitable for use with electronic components.

CHT Group AS1740

Chemical Family:Silicones
Product Type:1K (1 component) Sealant, Potting Compound
Cure Method:Moisture Cure
Application Area:ADAS (Advanced Driver Assistance Systems), Aerospace Applications, On-board Charger, EV Charging Stations, Driving Support System, Control Units, Inverter, Automotive Converter, Electric Motors, Brake System, Battery Management System (BMS), Passenger Protection System, Fiber Optic Cables, Compressors, Sensors
Application Method:Gun
Compatible Substrates & Surfaces:Aluminum, Steel, Metal, Copper, Composites, Brass

CHT Group AS1740 is part of a range of high-performance RTVs. It is a neutral cure silicone sealant specifically designed to meet the physical, chemical, and temperature resistance requirements of MIL-A-46146B. It features exceptional physical properties and is compatible with many sensitive substrates, including copper, brass, steel, aluminum, and FR4, making this an ideal option for many electronic applications where high performance is paramount. The alkoxy cure system produces a silicone sealant with excellent adhesion to most common substrates.

CHT Group ACC17

Product Type:Solventless & High Solids Coating, 1K (1 component) Coating
Features:Low Viscosity, Good Toughness, High Solids Content, Low Volatility, Low Odor, Excellent Substrate Adhesion, Fast Curing, Excellent Transparency Properties
Application Area:Printed Circuit Boards, Aerospace Applications
Application Method:Brush, Dip Coating, Spray
Chemical Family:Silicones

CHT Group ACC17 is a fast-curing, low-viscosity, low-volatile, 1-component, condensation-curing silicone coating. The uncured product can be applied by pouring or spraying and is readily cured into a tough, transparent rubber. It can be used to coat printed circuit boards to prevent the ingress of water and environmental contaminants.

CHT Group AS1821

Chemical Family:Silicones
Product Type:1K (1 component) Sealant, Potting Compound, Solvent free (100% Solids) Sealant
Cure Method:Air Dry, Moisture Cure
Application Area:ADAS (Advanced Driver Assistance Systems), On-board Charger, EV Charging Stations, Driving Support System, Control Units, Inverter, Connectors, Automotive Converter, Electric Motors, Brake System, Battery Management System (BMS), Passenger Protection System, Compressors, Sensors
Application Method:Gun

CHT Group AS1821 is a non-corrosive, neutral-cure, 1-part, RTV (Room Temperature Vulcanizing) silicone adhesive sealant. It is one in a range of acetone-cure products that are solvent-free. It exhibits excellent primerless adhesion to many substrates and cures rapidly at room temperature to form a tough rubber when in contact with atmospheric moisture. This product will not corrode copper or its alloys and is suitable for use with electronic components.

CHT Group AS1745G

Product Type:1K (1 component) Sealant
Application Area:Aerospace Applications
Compatible Substrates & Surfaces:Brass, Aluminum, Steel, Composites, Copper, Metal
Cure Method:Moisture Cure
Application Method:Gun
Chemical Family:Silicones

CHT Group AS1745G is part of a range of high-performance RTVs. It is a neutral cure silicone sealant specifically designed to meet the physical, chemical, and temperature resistance requirements of MIL-A-46146B. It features exceptional physical properties and is compatible with many sensitive substrates, including copper, brass, steel, aluminum, and FR4, making this an ideal option for many electronic applications where high performance is paramount. The alkoxy cure system produces a silicone sealant with excellent adhesion to most common substrates.

Silcoset 152

Chemical Family:Silicones
Product Type:1K (1 component) Sealant, 1K (1 component) Adhesive
Application Area:Aerospace Applications
Application Method:Gun, Pneumatic Gun
Compatible Substrates & Surfaces:Enamel, Thermoplastics, Glass, Steel, Ceramic, Thermosetting Plastics, Wood, Metal, Non-ferrous Metal, Aluminum, Ceramic Fabrics
Features:Room Temperature Vulcanizing, Good Weather Stability, Improved Ageing Resistance, Fast Cure, Room Temperature Curing, Non-slump, Good Adhesion, Excellent Multi-Substrate Adhesion, Primerless

Silcoset 152, a solvent-free 1-part RTV (Room Temperature Vulcanizing) silicone adhesive sealant, is part of the acetoxy cure product range. This versatile adhesive exhibits excellent primer-less adhesion to various substrates such as aluminum, non-ferrous metals, steel, glass, enameled surfaces, fabrics, ceramics, thermosetting and thermoplastics, and wood. Rapid room temperature curing, facilitated by atmospheric moisture, makes Silcoset 152 a great, versatile solution that increases efficiency while providing excellent durability, adhesion, and electrical properties.

Silcoset 153

Chemical Family:Silicones
Product Type:1K (1 component) Sealant, 1K (1 component) Adhesive
Application Area:Aerospace Applications
Application Method:Gun, Pneumatic Gun
Compatible Substrates & Surfaces:Enamel, Thermoplastics, Glass, Steel, Ceramic, Thermosetting Plastics, Wood, Metal, Non-ferrous Metal, Aluminum, Ceramic Fabrics
Features:Room Temperature Vulcanizing, Good Weather Stability, Improved Ageing Resistance, Fast Cure, Room Temperature Curing, Good Adhesion, Excellent Multi-Substrate Adhesion, Primerless

Silcoset 153 is a solvent-free, 1-part RTV (Room Temperature Vulcanizing) silicone adhesive sealant in the acetoxy cure product line. With excellent primer-less adhesion, it adheres well to various substrates, including aluminum, non-ferrous metals, steel, glass, enameled surfaces, fabrics, ceramics, thermosetting and thermoplastics, and wood. Rapid room temperature curing, triggered by atmospheric moisture, streamlines projects and enhances efficiency.