Products

CHT Group DF-758 is a 45% active silicone antifoam emulsion that is formulated to control foam in a wide variety of industrial applications. It was designed as a glass grinding aid to facilitate defect-free glass polishing. This product is ideal when low foam and excellent lubricity are needed.

CHT Group ICM-DF-289 is a specialty blend with 10% actives. This product is used in defoaming, cutting, and grinding solutions. It is ideal when extreme stability, low foam, and extended lubricity are required. This foam management product is customizable and water-dispersible.

ALPA-LSR 140201 is a liquid silicone rubber product in the SilSo injection molding range that is suitable for use in nearly all industrial applications due to its multifunctional mechanical and chemical properties. They crosslink without any by-products, and when combined with injection molding, these silicones enable fast, high-volume production of tiny components with complex shapes and fine details. Due to their biocompatible, odorless, and good haptic properties, they are the first choice for many medical and orthopedic products. Their high-temperature stability, good insulating properties, and low compression set are advantageous for the industrial processing of seal rings, plug-in connectors, and membranes.

CHT Group TA-5012 is an aqueous emulsion of silicone-based compound designed for foam management in agrochemical applications. It works well even at low concentrations and in both hot and cold systems and has great foam knockdown, and persistence. Applications Agrichemical spraying Chemical processing Bulk blending operations.

CHT Group JPA-15 FLW is a flowable powdered antifoam that can be easily incorporated into dry formulations, including “water dispersible granular.” It has a virtually instant release of active due to the rapid dissolution of base powder. Applications Agrichemicals: Wettable powders, tank add defoamers Concrete: cement admixtures, patch and repair formulations

CHT Group TE-352 FG is a 40% active food-grade emulsion with superb stability over a wide pH range. Its exceptional particle size and tight distribution also provide excellent freeze-thaw stability. This product is designed specifically for the de-nesting of plastics used in thermoforming, conveyor belts, and lubrication applications.

ICM 1670E is an industrial nonionic polydimethylsiloxane emulsion designed for various applications. It excels in tire dressing, leather conditioning, rubber treatment, and fiberglass treatment. Notable features of ICM 1670E include industry-leading particle size, excellent freeze-thaw stability, impressive gloss, and water repellency. Its formulation is such that it can be easily dispersed with water with minimal agitation, contributing to its versatility and ease of use in various industrial applications.

Low viscosity aminosiloxane with a high water repellence.

CHT Group DF-289 is an industrial antifoam with 100% actives. This organic defoamer is used for grinding applications.

CHT Group XAF-101 is an extreme-performance polymer blend with 100% active content. This foam management solution has excellent knockdown and persistence. It works effectively even at low concentrations and in both hot and cold systems. Applications Coatings Wastewater treatment Oil and gas processing Pulp and paper Grinding applications

CHT Group ICM-DF-758 is a specialty blend with 45% actives. This product is used in defoaming, cutting, and grinding solutions. It is ideal when extreme stability, low foam, and extended lubricity are required. This foam management product is customizable and water-dispersible.

ALPA-LSR 130201 is a liquid silicone rubber product in the SilSo injection molding range that is suitable for use in nearly all industrial applications due to its multifunctional mechanical and chemical properties. They crosslink without any by-products, and when combined with injection molding, these silicones enable fast, high-volume production of tiny components with complex shapes and fine details. Due to their biocompatible, odorless, and good haptic properties, they are the first choice for many medical and orthopedic products. Their high-temperature stability, good insulating properties, and low compression set are advantageous for the industrial processing of seal rings, plug-in connectors, and membranes.

CHT Group TE-35K FG is a 40% active food-grade emulsion with superb stability over a wide pH range. This product is best suited for de-nesting plastics used in thermoforming for all food packaging resins, rubber treatment, canning applications, and conveyor belts and lubrication.

CHT Group EM 1463 FG is CHT’s premier 35% active food-grade emulsion that can be diluted to 1% active. It has small particle size and is the best de-nester with extreme dilution. It can be used in continuous process plastic molding as an antistatic for food-grade packaging and for de-nesting of plastics used in thermoforming.