Knowde Enhanced TDS
Identification & Functionality
- Base Oil Type
- Metalworking Fluid Type
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features and Benefits
Corrosion Protection:
Extremely Effective Corrosion Inhibitor Package Which Prevent Stain On Most Copper Alloys And Aluminum Alloys. Also Contains Rust Inhibitors Which Prevents In-process Rust On Machines And Parts.
Versatile:
Designed To Provide Good Lubrication In A Variety Of Operations On A Variety Of Materials. Easy To Maintain And Control. Waste Treatable Using Standard Fluid Treatment Procedures And Systems.
Microbialcontrol:
Provides Effective Protection Against Bacteria And Mold If Product Concentration Is Properly Maintained. Provides Long Life And Minimizes The Use Of Additives.
Foam Control:
Designed To Be Low Foaming In Soft And Hard Water.
Applications & Uses
- Markets
- Applications
CIMSTAR 50-588CU-2 can be used on copper, copper alloy, carbon steels, malleable iron, carbon steels cast steel, high speed steel, high alloy steels, stainless steels, zinc alloy and most aluminum alloy.
For moderate to heavy-duty operations.- Concentration
Non-solvent Titration, Total Alkalinity, CIMCHEK™ Test Strip or Refractometer can be used.
The Refractometer Factor is 1.1
Multiply the scale reading obtained on your CIMCOOL® Refractometer by this factor to obtain the mix concentration in percent. Calibrate the refractometer so that it reads 0.0 with water before testing the sample mix. Remove gross contaminants from the sample mixes before testing. A refractometer is only recommended for use in checking the concentration of a fresh charge.
Properties
- Color
- Physical Form
- Appearance
- Clear
- Odor
- Chemical
- Solubility in Water
- 100% Miscible
- Typical Properties
| Value | Units | Test Method / Conditions | |
| pH Mix 5% (Typical Operating) | 8.4 | — | — |
| Density (60°F, 15.6 °C) | 0.96 | — | — |
Technical Details & Test Data
- Recommended Starting Dilutions
CX 50-588CU-2 is to be mixed with water for use. Always add concentrate to water. Fluid may be more difficult to mix when water temperature is below 55F (13 C). Add no other materials to the concentrate or mix unless approved by your CIMCOOL® District Manager.
Grinding 5% - 10% (1:20 to 1:10)
Machining 5% - 10% (1:20 to 1:10)
Storage & Handling
- Handling and Storage
If frozen, product separates. Thaw completely at room temperature and stir thoroughly before use. Inside storage is recommended.