Knowde Enhanced TDS
Identification & Functionality
- Base Oil Type
- Metalworking Fluid Type
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features and Benefits
Meets Aerospace Requirements:
CIMTECH 310 Passes Bi-metallic And Aluminum (7075) “sandwich” Corrosion Tests. Approved Product For Many Aerospace Manufacturers.
Excellent Lubricity:
CIMTECH 310 Provides Excellent Tool Life And Surface Finish.
Excellent Rancidity Control:
CIMTECH 310 Rejects Tramp Oil, Which Extends Sump Life.
Excellent Foam Control:
Very Low Foaming Product, Even When Used With De-ionized Water.
Applications & Uses
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Applications
CIMTECH 310 can be used on wrought aluminum alloys (2024, 6061, 7050, and 7075), cast aluminum alloys (380, 390), cast iron, nodular iron, carbon steels, stainless steels, titanium and other exotic alloys. It should not be used on magnesium alloys.
CIMTECH 310 metalworking fluid is recommended for machining and grinding operations, including creep feed grinding, on non-ferrous or ferrous metals.- Concentration
BCG Titration, Total Alkalinity, CIMCHEK™ Test Strip or Refractometer can be used.
The Refractometer Factor is 1.7
Multiply the scale reading obtained on your CIMCOOL® Refractometer by this factor to obtain the mix concentration in percent. Calibrate the refractometer so that it reads 0.0 with water before testing the sample mix. Remove gross contaminants from the sample mixes before testing. A refractometer is only recommended for use in checking the concentration on a fresh charge.
Properties
- Color
- Physical Form
- Appearance
- Clear
- Odor
- Chemical
- Solubility in Water
- 100% Miscible
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Viscosity (SUS, 100°F, 38°C) | 110.0 | — | — |
| pH Concentrate | 8.2 | — | — |
| Total Chlorine | 0.0 | ppm | — |
| Silicones | None | — | — |
| Weight (60°F, 15.6 °C) | 9.0 | Ib/gal | — |
| pH Mix 5% (Typical Operating) | 7.8 | — | — |
| Chloride | max. 900 | ppm | — |
| Total Sulfur | 0.0 | wt% | — |
Technical Details & Test Data
- Recommended Starting Dilutions
CIMTECH 310 is to be mixed with water for use. Always add concentrate to water. Fluid may be more difficult to mix when water temperature is below 55°F (13°C). Add no other materials to the concentrate or mix unless approved by your CIMCOOL® Territory Manager.
Grinding 5% - 10% (1:20 to 1:10)
Machining 5% - 10% (1:20 to 1:10)
Storage & Handling
- Handling and Storage
If frozen, product separates. Thaw completely at room temperature and stir thoroughly before use. Inside storage is recommended.