Ciprene - 2811 - Cipade - 1K (1 component) Adhesive

Knowde Enhanced TDS

Identification & Functionality

Carrier: Solvent-based
Chemical Family: Polychloroprenes
Product Type: 1K (1 component) Adhesive,
Contact Adhesive,
Solventborne Adhesive
Technologies: Ready-to-Use Products
Product Families: Ready-to-Use Products — Adhesives & Sealants
Contact Adhesives

Features & Benefits

Ready-to-Use Product Features: Excellent Substrate Adhesion,
High Temperature Resistance,
Solvent-Based

Applications & Uses

Markets: Consumer Goods
Applications: Consumer Goods — Carpet & Upholstery
Consumer Goods — Footwear
Application Area: Footwear,
Roofing Substrates,
Upholstery
Application Method: Spray
Compatible Substrates & Surfaces: Cork
Application Method: Shake the adhesive can very well before using.

Remove dust from surfaces previously prepared for bonding.

Apply the glue by spraying the surfaces to be glued, allowing to dry according to the indicated drying time. Reactivate if the open time has passed. Immediately after reactivation, the surfaces should be pressed at about 6 Kg / cm², for 10/12 seconds.

Properties

	Value	Units	Test Method / Conditions
Viscosity (Brookfield RVTD-Spindle 4, 20 rpm, 20°C)	400 - 600	cPs	ME 006
Solids Content	15 - 19	%	ME 007
Density	0.80 - 0.86	g/cm³	ME 009
Open Time (Cold Bonding)	10 - 35	minutes	—
Drying Time	10 - 15	minutes	—
Reactivation (After Drying)	50	°C	—
Heat Resistance (Creep Test)	120	°C	—

Regulatory & Compliance

Packaging & Availability

Storage & Handling

Shelf Life: 6 Months
Storage Information: This product must be conserved in aired place, the original packing tightly closed, protected from humidity and solar rays, and in temperatures above 10ºC. This product is sensitive to cold, may gel at temperatures below the above. In these conditions the product is valid for 6 months.