Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Application Method
- Wet Bonding: Used for permeable coatings or absorbent substrates. Apply the adhesive with notched trowel and after 15-20 minutes, start the installation of the coating that should be free of tensions. Press evenly so that there is a good wetting of the coating's back by the adhesive film. The adhesive open time is approximately 45 minutes.
- Adhesion bonding: Apply the adhesive with a notched trowel and wait for the color to turn from yellow to transparent. At a temperature of 20ºC and 55% humidity the waiting time is 30-45 minutes. For lower temperatures, higher humidity and less absorbent surfaces extend the holding time. Install the coating by smoothing and pressing evenly against the glue film, and then rolling with a roller. The adhesive film maintains a high adhesiveness for at least 2 hours.
Properties
- Color
- Physical Form
- Characteristics
Value | Units | Test Method / Conditions | |
Viscosity (Brookfield RVTD-Spindle 4, 20 rpm, 20°C) | 19000 - 22000 | cPs | ME 006 |
Solids Content | 70 - 74 | % | ME 007 |
Density | 1.20 - 1.30 | g/cm³ | ME 009 |
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Shelf Life
- 1 Year
- Storage Information
This product must be kept in a well-ventilated place, in its original package well closed, protected from humidity and solar rays, and at temperatures above 10ºC. In this condition the product is valid for 1 year.