Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Application Method
- The surfaces to be bonded must be dry, clean, smooth and without cracks. They must be resistant to traction and compression.
- Laying must be done within the adhesive open time. The application is made in parallel layers, starting from the wall opposite one of the doors and ending at the doors, leaving about 10 mm along the walls for the application of the skirting boards.
- Apply the glue with a No. 3 notched trowel, the adhesive layer must be about 2 mm to 4 mm thick (at the thinnest points) and the grooves must be as straight as possible.
- When laying the parquet, mosaic parquet or lamparquet, the material must be beaten well with a rubber mallet, in the direction of both fixing and adjusting the blocks or mosaics to each other. If the floor is too absorbent, apply another layer of glue or a primer consisting of 50% glue and 50% water.
- The materials and glue must be exposed 48 hours before the application site, so that their stabilization is complete. At the time of installation, the screed's humidity must not exceed 3.5% and that of the wood must not exceed 6%.
- All finishing work must be carried out 24 to 48 hours after laying, for temperatures of 20ºC and values between 50 and 60% relative humidity.
Note : The temperature and humidity of the environment and the materials at the time of application have an influence on the final bonding results. Adhesive residues must be removed with a damp cloth. Before each application the adhesive must be mixed well and after each application the package should be closed well to avoid the formation of skins.
Properties
- Color
- Physical Form
- Characteristics
Value | Units | Test Method / Conditions | |
Viscosity (Brookfield RVTD-Spindle 7, 20 rpm, 20°C) | 15000 - 25000 | cPs | ME 006 |
Solids Content | 66 - 72 | % | ME 007 |
Density | 1.45 - 1.35 | g/cm³ | ME 009 |
pH | 6 - 9 | - | ME 018 |
Drying Time (at 20°C) | 6 - 12 | hrs | - |
Open Time | min. 20 | minutes | - |
Final Adhesive Force | 24 | hrs | - |
Yield | 700 - 800 | g/m² | - |
Minimum Work Time | 15 | °C | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Information
1 / 1000 Kg
Storage & Handling
- Shelf Life
- 8 Months
- Storage Information
This product must be stored in a well-ventilated place, in its original packaging, well closed, protected from moisture and sunlight, and at temperatures between 15ºC and 25ºC. Under these conditions the product is valid for 8 months.