company tower banner
Classic Coatings Systems Company Logo

Classic Coatings Systems Invisible Shield 2000

Сlassic Coating's Invisible Shield is a clear penetrating sealer & enhancer, single component low VOC, waterborne Sodium Methyl silicate sealer designed to be used over Classic Acid stains, pavers, concrete, stucco, granite, masonry, stone, brick, Spanish tile and some natural stone, provided the surface is properly prepared.

Product Type: Stains

Features: Abrasion Resistant, Cost Effective, Excellent Hot Tire Pickup Resistance, Fast Drying, Good Adhesion, Good Penetration, High Durability, Low Fume, Low Odor, UV Stabilized

Chemical Family: Silicates

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family
Product Type
Coverage

1 gallon (3.8 Liters) covers approximately 280 sq. ft. to 400 sq. ft. with two applications.

Features & Benefits

Features

It may be used for interior or exterior applications in a wide range of climates. Invisible Shield has excellent UV stability and will not yellow, chalk or peal. It is formulated primarily as a penetrating clear seal for applications over concrete restoration products and pool deck (not slippery) coatings where a low maintenance, easily cleanable surface is desired. It is environmentally safe and cleans with water.

Applications & Uses

Uses
  • Pool Decks
  • Driveways
  • Walkways
  • Over stained concrete
  • Restoration projects
  • Architectural toppings
  • Concrete floors
  • Block walls
  • Patios
  • Masonry
  • Spanish Tile
  • Stucco
  • Natural Stone
Advantages
  • Resists water penetration
  • Waterborne: Low VOC <100g/1,
  • no fumes and low odors
  • High UV stability
  • Excellent hot tire pick-up
  • Excellent adhesion and durability
  • Low cost, easy installation
  • and low maintenance
  • Easy to clean with water
Limitations
  • Not to be used over water based stains
  • Recommended application temperature
  • should be between 55°F and 100°F
  • Must be installed over a clean dry surface
  • Fast drying time about 30 minutes
  • Not for use under water
  • Minimum oil penetration

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Coverage Per Liquid Gallon280 - 400Sq ft
AbrasionExcellent Resistance
VOC89.0g/l
Degree of GlossNone

Safety & Health

Safety

 

  • Highly Recommended To Test A Small Inconspicuous Area First.
  • Turn Off Sprinklers For Two Days Prior To And After.
  • Always Protect Neighboring Surfaces Including Wood,
  • Carpet, Metal, Landscaping And Other Non-masonry Surfaces.
  • Caution: Surface Is Slippery When Wet.
  • New Concrete Must Cure For 28 Days Before Sealer Is Apply.

Packaging & Availability

Packaging Type
Packaging

Available in 1 gallon jugs, 5 gallon pails and 55 gallon drums.

Storage & Handling

Shelf Life
2 (years)
Storage
  • Store in a cool, dry location.
  • Store out of direct sunlight.
  • Protect pails and jugs from weather and other damage.
  • Store at a temperature between 40°F (4°C) and 90°F (32°C).