Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
- Coverage
1 gallon (3.8 Liters) covers.
approximately:- 1st application: 300-350 sq ft.
-2nd application: 350-400 sq ft.
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
CRU repels water, oil, chemicals, and acid. It is formulated primarily as a clear sealer for durable protection over concrete restoration projects and is low maintenance. It is typically applied with a 9"x1/2" nap roller with 1-hour pot life, provided that the surface is properly prepared. Satin Armor 2K is environmentally safe and cleans up with water. Also available in high gloss or in a matte finish. Color additives are also available in solid colors and
metallic colors. Caution: Sealers may be slippery when wet. If desired, add Classic Gator Grip slip resistance during the second application only.
Applications & Uses
- Applications
- Application Method
- Uses
- Commercial, industrial, warehouse, retail stores, restaurant & office.
- Residential, driveways, pools, walkways & concrete decks.
- Restoration projects and architectural toppings.
- Concrete, bricks, flagstone, stone, epoxy, metal & pavers.
- Applications
- We do not recommend applying the sealer on surfaces over 90 F. Test a small area first. Use a 9” or 18” NAP 3/8 or 1/2” Roller to spread evenly. Do not allow the sealer to puddle. Back roll if necessary. Begin by cutting in the edges and trim with the brush. The center may be done like you would normally paint a surface while making sure you overlap and back roll each section carefully. Remember to mix the sealer very well before every application.
- Apply a second application after 8 hours at around 75 F. Allow light foot traffic after 24 hours. Allow heavy traffic after 72 hours at 75 F with 50% humidity. Pot life is 35 minutes. In hot working conditions, place container of sealer in a bucket of ice to extend your working time.
- Advantages
- Excellent adhesion and durability
- Nano technology with voc<1 and low odor
- UV Stable and fast drying
- Low cost, easy to apply, and low maintenance
- No fumes, non-hazmat and non-corrosive
- No hot tire pick up after 5 days & heat resistant
- FDA secondary grade
- Longer than usual pot life of 1 hour
- Excellent as a protective floor coating
- CRU repels water, oil, chemicals, and acid
- Limitations
- Application surface temperature should be between 55ºF and 110ºF
- Never apply adhesives over stained or sealed surfaces.
- May cause damage. Will reflect working cracks in substrate and do not allow to puddle
- Must be installed over a clean and dry surface Do not freeze.
- Keep container closed when not in use and out of sun
- Must cure for 4 to 5 days before parking a vehicle on it.
Safety & Health
- Safety
- Highly Recommended To Test A Small Inconspicuous Area First.
- Turn Off Sprinklers For Two Days Prior To And After.
- Always Protect Neighboring Surfaces Including Wood,
- Carpet, Metal, Landscaping And Other Non-masonry Surfaces.
- Caution: Surface Is Slippery When Wet.
- New Concrete Must Cure For 28 Days Before Sealer Is Apply.
Packaging & Availability
- Packaging Type
- Packaging
Available in 1 gallon jugs. Special quantities available upon request
Storage & Handling
- Shelf Life
- 14 (months)
- Storage
- Keep in a cool, dry location out of direct sunlight.
- Protect pails and jugs from weather and other damage.
- Store at a temperature between 40ºF (4ºC) and 90ºF (32ºC).