company tower banner
Classic Coatings Systems Company Logo

Classic Coatings Systems Matte Sealer

Classic Matte Sealer is an acrylic, single component sealer that is designed to be used over all of our stains and on polymer-modified cement toppings, waterborne colorants, concrete, brick, masonry, pavers, Spanish tile, stucco, and natural stone. Be sure to properly prepare surfaces before applying.

Product Type: 2K (2 component) Coating, Sealer, Stains

Compatible Substrates & Surfaces: Concrete, Masonry

Features: Acid Resistant, Chemical Resistant, Cleanable, Cost Effective, Enhanced Film Water Repellency, Excellent Hot Tire Pickup Resistance, Fast Drying, Good Adhesion, Good Non-Yellowing Properties, Good Penetration, High Durability, Low Fume, Low Odor, Low VOC, Matte Finish, Non Corrosive, Oil Resistant, Slip, UV Stabilized, Water Resistant

Application Method: Roller

Chemical Family: Acrylics & Acrylates, Aliphatics

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Coverage

1gallon (3.8 Liters) covers approximately 300sq.ft. to 450 sq.ft.

Features & Benefits

Features

It has low VOC, no fumes, low odors, and high solids. It may be used for interior and exterior applications in a wide range of climates. It is excellent at repelling water, provides high UV stability, and will not yellow. It is formulated primarily as a clear seal for applications over concrete restoration projects and pool deck coatings. It is ideal for when a low maintenance, easily cleanable surface is desired. It is environmentally safe, has excellent adhesion, durable, low cost, easy to install, and cleans up with soap and water.

Applications & Uses

Application Method
Compatible Substrates & Surfaces
Uses
  • Pool Decks
  • Walkways
  • Over stained concrete
  • Restoration projects
  • Architectural toppings
  • Concrete floors
  • Block walls
  • Patios
  • Masonry
  • Spanish Tile
  • Stucco
  • Natural Stone
Advantages
  • Water resistant
  • Waterborne: Low VOC <100g/l,
  • no fumes and low odors
  • High UV stability
  • Excellent hot tire pick-up
  • Excellent adhesion and durability
  • Low cost, easy installation and low
  • maintenance
  • Easy to clean with soap and water
Limitations
  • May reflect working cracks in substrate
  • Recommended application temperature
  • should be between 55° F and 95° F
  • Must be installed over a clean dry surface
  • Not freeze thaw
  • Not for use under water
  • Surface must not contain moisture and
  • efflorescence
  • If using high performance tires we recommend
  • using a 2 part polyurethane sealer

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Coverage Per Liquid Gallon300 - 450Sq ft
AbrasionExcellent
VOCmax. 100g/l
Degree of GlossNone Matte Finish
Solids Content by Volume26.4%
Solids Content by Weight29.4%

Safety & Health

Safety

 

  • Highly Recommended To Test A Small Inconspicuous Area First.
  • Turn Off Sprinklers For Two Days Prior To And After.
  • Always Protect Neighboring Surfaces Including Wood,
  • Carpet, Metal, Landscaping And Other Non-masonry Surfaces.
  • Caution: Surface Is Slippery When Wet.
  • New Concrete Must Cure For 28 Days Before Sealer Is Apply.

Packaging & Availability

Packaging Type
Packaging

Available in 1 gallon jugs, 5 gallon pails and 55 gallon drums.

Storage & Handling

Shelf Life
2 (years)
Storage
  • Store in a cool,
  • dry location.
  • Store out of direct sunlight.
  • Protect pails and jugs from weather and other damage.
  • Store at a temperature between 40°F (4°C) and 90°F (32°C).