company tower banner
Classic Coatings Systems Company Logo

Classic Coatings Systems Polyurethane Acrylic Wet-Look High Gloss Sealer

Classic Polyurethane/Acrylic Wet-Look Sealer is a clear, single component, low VOC, high solids, waterborne, special blend sealer that is designed to be used over all of our stains, polymer-modified cementitious toppings, concrete, waterborne colorants, masonry, and sealers. It may be used for exterior and interior applications in a wide range of climates. Classic Polyurethane Acrylic Sealer acts as a UV stabilizer and will not yellow.

Product Type: 1K (1 component) Coating, Sealer, Stains, Waterborne Coating

Compatible Substrates & Surfaces: Concrete, Masonry

Features: Acid Resistant, Chemical Resistant, Cleanable, Cost Effective, Enhanced Film Water Repellency, Excellent Hot Tire Pickup Resistance, Excellent UV Stability, Fast Drying, Good Adhesion, Good Non-Yellowing Properties, High Durability, High Gloss, Low Odor, Low VOC, Non Corrosive, Oil Resistant, Slip, Water Resistant

Application Method: Roller

Chemical Family: Aliphatics, Polyurethanes (PU)

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Coverage

1 gallon (3.8 Liters) covers approximately 300sq. ft. to 450 sq.ft.

Features & Benefits

Features

It is formulated primarily to work as a top layer for protection and applies over concrete restoration projects and anywhere a low maintenance job is desired. It is typically applied with a sprayer or 9”x1/2” nap roller, provided that the surface is properly prepared. It is environmentally safe with low VOC and cleans up easily with soap and water. Available in clear or solid colors

Applications & Uses

Application Method
Compatible Substrates & Surfaces
Uses
  • Over stained & stamped concrete
  • Driveways, walkways and concrete decks
  • Restoration projects•Architectural toppings
  • Concrete
  • Bricks
  • Flagstone
  • Pavers
  • Sand joint stabilizer
Advantages
  • Resists water penetration Waterborne
  • Low VOC <76 g/l, no fumes and low odors
  • High UV stabilityNo hot tire pick up after 5 days & heat resistant
  • Excellent adhesion and durability
  • Low cost, easy installation and low maintenance
  • Easy to clean 
Limitations
  • May reflect working cracks in substrate
  • Recommended application temperature should be between 55° F and 95° F
  • Must be installed over a clean dry surfaceMust cure for 5 days before parking a vehicle
  • Not for use under water or for freeze thaw
  • Remove all oil, dirt and efflorescence

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Coverage Per Liquid Gallon300 - 450Sq ft
AbrasionExcellent
VOCmax. 76g/l
Degree of GlossHi-Gloss
Solids Content by Volume30.75%
Solids Content by Weight29.0%

Safety & Health

Safety

 

  • Highly Recommended To Test A Small Inconspicuous Area First.
  • Turn Off Sprinklers For Two Days Prior To And After.
  • Always Protect Neighboring Surfaces Including Wood,
  • Carpet, Metal, Landscaping And Other Non-masonry Surfaces.
  • Caution: Surface Is Slippery When Wet.
  • New Concrete Must Cure For 28 Days Before Sealer Is Apply.

Packaging & Availability

Packaging Type
Packaging

Available in 1 gallon jugs, 5 gallon pails and 55 gallon drums.

Storage & Handling

Shelf Life
3 (years)
Storage
  • Store in a cool,dry location.
  • Store out of directsunlight.
  • Protect pails and jugs from weather and other damage.
  • Store at a temperature between 40ºF (4ºC)and 90ºF (32ºC).