company tower banner
Classic Coatings Systems Company Logo

Classic Coatings Systems Pro-Seal 5000 Matte Finish Lacquer Sealer

Classic pro-seal 5000 is a matte, low VOC, single component, high solids, solvent (acetone) based sealer that is designed to be used over polymer modified cementitious toppings, concrete, waterborne colorants, masonry, stone, pavers, and brick. It may be used for exterior applications in a wide range of climates.

Product Type: 1K (1 component) Coating, Lacquers, Sealer, Stains, Waterborne Coating

Compatible Substrates & Surfaces: Concrete, Masonry

Features: Cleanable, Cost Effective, Enhanced Film Water Repellency, Excellent Hot Tire Pickup Resistance, Fast Drying, Good Adhesion, Good Non-Yellowing Properties, Good Penetration, High Durability, Low VOC, Matte Finish, UV Stabilized, Water Resistant

Chemical Family: Acrylics & Acrylates

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family
Coverage
  • Available in 1 gallon jugs, 5 gallon pails and 55 gallon drums.
  • 1 gallon (3.8 Liters) covers approximately 250 sq. ft. to 400 sq.ft.

Features & Benefits

Features

ro-seal 5000 has excellent uv stability, will not yellow, and will enhance the color of your surface. Pro-seal 5000 is formulated primarily as a clear seal for applications over concrete restoration products and pool deck coatings where a low maintenance, easily cleanable surface is desired.  May also be applied to spanish tile, stucco, overlays, and natural stone, provided the surface is properly prepared.  Pro-seal 5000 matte sealer cleans up easily with soap and water. After two applications, wait 48 hours before parking a vehicle. Available in 1gl jugs, 5gl pails, and 55gl drums.

Applications & Uses

Compatible Substrates & Surfaces
Uses
  • Pool Decks (Slippery When Wet)
  • Driveways
  • Walkways Over Stained Concrete
  • Restoration Projects
  • Architectural Toppings
  • Concrete Floors
  • Block Walls
  • Patios
  • Masonry
  • Spanish Tile
  • Stucco
  • Natural Stone
Limitations
  • May Reflect Working Cracks In Substrate
  • Recommended Application Temperature Should Be Between 55° F And 85° F
  • Must Be Installed Over A Clean And Dry Surface
  • Not Freeze Thaw
  • Not For Use Under Water
  • Surface Must Not Contain Moisture And Efflorescence
Advantages
  • Presists water penetration
  • low voc <100g/l and enhances colorcross-link & high uv stability
  • excellent hot tire pick-up
  • excellent adhesion and durability
  • low cost, easy installation and low maintenance
  • can be diluted with up to 50% acetone on the first application only

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Coverage Per Liquid Gallon250 - 400Sq ft
AbrasionGood
VOCmax. 100 g/l
Degree of GlossHi-Gloss
Solids Content by Volume23.0%
Impact ResistancePasses
Flexibility (ASTM D-1737)175.0º

Safety & Health

Safety
  • Highly recommended to test a small inconspicuous area first.
  • Turn off sprinklers for two days prior to and after
  • Always protect neighboring surfaces including wood,
  • carpet, metal, landscaping and other non-masonry surfaces.
  • Caution: Surface is slippery when wet.
  • New concrete must cure for 28 days before sealer is apply.

Packaging & Availability

Packaging Type

Storage & Handling

Shelf Life
2 (years)
Storage
  • Store in a cool, dry location
  • Store out of direct sunlight.
  • Protect pails and jugs from weather and other damage.
  • Store at a temperature between 40ºF (4ºC)and 90ºF (32ºC).