Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
- Limitations
- May reflect working cracks in substrate
- Recommended application temperature should be between 55° F and 95° F
- Must be installed over a clean dry surface
- Not freeze thaw.
- Not for use under water
- Surface must not contain moisture and efflorescence
- Coverage
1 gallon (3.8 Liters) covers approximately 300sq. ft. to 450 sq.ft.
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
Quick Seal acts as an excellent water repellent, UV stabilizer, and will not yellow. Quick Seal is formulated primarily as a clear seal for applications over concrete restoration projects and pool deck coatings. It is ideal for where a low maintenance, easily cleanable surface is desired. It is typically applied over concrete surfaces but may also be applied as a sand joint stabilizer, provided the surface is properly prepared. Classic Quick Seal is environmentally safe and cleans up easily with soap and water.
Applications & Uses
- Markets
- Applications
- Uses
- Pool Decks
- Driveways
- Walkways
- Over stained concrete
- Restoration projects
- Architectural toppings
- Concrete floors
- Block walls
- Patios
- Masonry
- Spanish Tile
- Stucco
- Natural Stone
Properties
- Color
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Coverage Per Liquid Gallon | 300 - 450 | Sq ft | — |
| Abrasion | Excellent | — | — |
| VOC | max. 50 | g/l | — |
| Degree of Gloss | Hi-Gloss, Wet Look | — | — |
| Solids Content by Weight | 30.35 | % | — |
| Solids Content by Volume | 27.567 | % | — |
Packaging & Availability
- Packaging Type
- Packaging
Available in 1 gallon jugs, 5 gallon pails and 55 gallon drums.
Storage & Handling
- Shelf Life
- 2 (years)
- Storage
- Store in a cool ,dry location.
- Store out of direct sunlight.
- Protect pails and jugs from weather and other damage.
- Store at a temperature between 40ºf (4ºc)and 90ºf (32ºc).
- Handling
- Prepare surface by carefully and thoroughly removing all trace of any foreign matter.
- Apply 1st coat of quick seal by brush, roller or sprayer.
- A 3rd application may be required in high traffic areas. Cure time at 77°f: dry to touch in 30 minutes, re-coat after 1-2 hours, light foot traffic after 12 hours and full cure in 7 days.
- Note: system thickness 2-3 wet mils Per coat. Repeat step (2) for the 2nd coat.