Classic Coatings Systems Satin Armor 2K Sealer

Identification & Functionality

Chemical Family

Aliphatics,

Polyurethanes (PU)

Product Type

2K (2 component) Coating,

Sealer,

Stains,

Waterborne Coating

Technologies

Ready-to-Use Products

Product Families

Ready-to-Use Products — Paints & Coatings

Primers & Sealers

Coverage

gallon (3.8 Liters) covers
approximately:- 1st application: 300-350 sq ft
2nd application: 350-400 sq ft

Features & Benefits

Labeling Claims

Environmentally Friendly

Ready-to-Use Product Features

Acid Resistant,

Chemical Resistant,

Cleanable,

Cost Effective,

Enhanced Film Water Repellency,

Excellent Hot Tire Pickup Resistance,

Fast Drying,

Good Adhesion,

Good Non-Yellowing Properties,

Good Penetration,

High Durability,

Low Fume,

Low Odor,

Low VOC,

Non Corrosive,

Oil Resistant,

Slip,

UV Stabilized,

Water Resistant

Features

CRU repels water, oil, chemicals, and acid. It is formulated primarily as a clear sealer for durable protection over concrete restoration projects and is low maintenance. It is typically applied with a 9"x1/2" nap roller with 1-hour pot life, provided that the surface is properly prepared. Satin armor 2k is environmentally safe and cleans up with water. Also available in high gloss or in a matte finish. Color additives are also available in solid colors and metallic colors. Caution: sealers may be slippery when wet. If desired, add classic gator grip slip resistance during the second application only.

Applications & Uses

Markets

Building & Construction,

Industrial

Applications

Building & Construction — Building Envelope & Roofing

Architectural Coatings

Building & Construction — Building Materials

Pools & Landscaping,

Sealants & Caulks

Building & Construction — Infrastructure, Roads & Paving

Pavement, Highways, Roads & Bridges

Industrial — Other Industrial Applications

Compatible Substrates & Surfaces

Concrete,

Masonry

Uses

• Commercial,  industrial,  warehouse,  retail  stores,  restaurant  &  office.
• Residential,  driveways,  pools,  walkways  &  concrete  decks.
• Restoration  projects  and  architectural  toppings.
• Concrete,  bricks,  flagstone,  stone,  epoxy,  metal  &  pavers.

Applications

• We  do  not  recommend  applying  the  sealer  on  surfaces  over  90  F.  Test  a small  area  first.  Use  a  9”  or  18”  NAP  3/8  or  1/2”  Roller  to  spread  evenly.  Do not  allow  the  sealer  to  puddle.  Back  roll  if  necessary.  Begin  by  cutting  in the  edges  and  trim  with  the  brush.  The  center  may  be  done  like  you  would normally  paint  a  surface  while  making  sure  you  overlap  and  back  roll  each section  carefully.  Remember  to  mix  the  sealer  very  well  before  every application.
• Apply  a  second  application  after  8  hours  at  around 75  F.  Allow  light  foot  traffic  after  24  hours.  Allow  heavy  traffic  after  72 hours  at  75  F  with  50%  humidity.  Interior  Pot life  is  1  hour  and  exterior  pot life  is  35-40  minutes.  In  hot  working  conditions,  place  container  of  sealer in a bucket of ice to extend your working time. 

Advantages

• Excellent Adhesion And Durability
• Nano Technology With Voc<1 And Low Odor
• Uv Stable And Fast Drying
• Low Cost, Easy To Apply, And Low Maintenance
• No Fumes, Non-hazmat And Non-corrosive
• No Hot Tire Pick Up After 5 Days & Heat Resistant
• Fda Secondary Grade
• Longer Than Usual Pot Life Of 1 Hour
• Excellent As A Protective Floor Coating
• Cru Repels Water, Oil, Chemicals, And Acid

Packaging & Availability

Packaging Type

Drums

Packaging

Available in 1 gallon jugs. Special quantities available upon request.

Storage & Handling

Shelf Life

14 (months)

Storage

• Keep in  a   cool, dry  location out of  direct sunlight.
• Protect pails and jugs from weather and other  damage.
• Store at a temperature between 40ºF (4ºC) and 90ºF (32ºC).