Knowde Enhanced TDS
Identification & Functionality
- Base Oil Type
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
Silicone Grease 3005 is inert to virtually all substrates with the exception of silicone rubber. It is widely used for lubricating O‐rings, gaskets, valves and seals as well as surfaces that require excellent lubricating properties over long periods without drying out. It is not recommended for metal‐to‐metal lubrication or on surfaces that will be painted or finished.
- Benefits
- Wide service temperature range & high resistance to oxidation.
- Excellent lubricant and sealant for harsh environments such as down-hole and subsea environments.
- Withstands frequent wash-downs and hose-downs.
- Approved for use in Food Processing and Food Packaging applications facilities where incidental contact with food may occur.
- 100% PDMS Silicone Grease Compound: contains no solvent.
- Safe for O-rings, gaskets, valves and seals.
- Protects against corrosion and carbon buildup on food sealing equipment.
.
Applications & Uses
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Applications
- O‐ring lubricant
- Gasket lubricant
- Valve lubricant
- Insulates against moisture and extreme weather conditions
- Waterproofing grease
- Dielectric grease
- Damping medium for electronic equipment
- Sealant for pressure systems
- Lubricant for rubber cables and plastic cables
- NSF H1 Food grade grease for food processing, food packing, canning and bottling equipment
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| NLGI rating | NLGI#2 | - | - |
| Specific gravity | 1.03 | - | - |
| Temperature Range | ‐40 to 200 | °C | - |
| Bleed | 0.5 | % | - |
| Evaporation | 0.1 | % | - |
| Penetration | 255.0 | - | - |
| Dielectric strength | min. 450 | volts/mil | - |
Regulatory & Compliance
- Certifications & Compliance
- NSF H1 / FDA 21 CFR Specifications
Registered with the NSF (Registration #136725) as an H1 Lubricant and meets the FDA 21 CFR 175.300 and 21 CFR 178.3570 for Lubricants with incidental food contact.
Technical Details & Test Data
- O‐Ring Compatibility
Aflas (0) Natural Rubber (4)
Chemraz (4) Polyacrylate (4) Kalrez (4) Polyurethane, millable (4)
Nitrile, Hydrogenated (4) Teflon, virgin (4) Polyurethane, Cast (0) Butyl (4) Styrene Butadene (4) Ethylene‐propylene (4)
Buna‐N (Nitrile) (4) Hypalon (4) Epichlorohydrin (4) Neoprene (4) Fluorosilicone (4) Polysuulfide (4) Silicone (2) Vamac (4) (4) Good, both for static and dynamic seals
3) Fair, usually OK for static seals
2) Sometimes OK for static seals, not OK for dynamic seals
1) Poor
0)No Data
Safety & Health
- Limitations
Do not use with highly oxidative chemicals such as liquid oxygen, chlorine or peroxides, norsurfacesto be painted. Not for use as a lubricant for metal‐to‐metal surfaces.
Packaging & Availability
- Packaging
Squeeze tubes
- 1‐case (12 x 5.3oztubes
- Minimum of 1‐case (12‐tubes per order)
1 lb to 40 lb. containers
- 1 x 1lb plastic jar
- 4 x 1 lb. plastic jars.
- 8 lb. pail (1‐gallon)
- 40 lb. pail (5‐gallon)
- 2cc (2g) pillow packs
- 1‐case (2,500 x 2cc) minimum order
Storage & Handling
- Shelf Life
- 12 months
- Storage
When stored in original unopened container at or below 100°F. It has a shelf life of 12 months from date of shipment. Extended storage life is probable. Containers should always be kept sealed when not in use.