Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Form
- Mechanical Properties
- Typical Properties
- Electrical Properties
- Permanence Properties
Value | Units | Test Method / Conditions | |
Tensile Strength at Break | 75.0 | MPa | ASTM D638 |
Tensile Elongation at Break | 4.0 | % | ASTM D638 |
Flexural Strength | 126.0 | MPa | ASTM D790 |
Flexural Modulus | 2900.0 | MPa | ASTM D790 |
Impact Strength, Izod Notched | 65.0 | J/m | ASTM D256 |
Value | Units | Test Method / Conditions | |
Relative Density 23/23°C | 1.16 | — | ASTM D792 |
Mold Shrinkage | 1.8 | % | ASTM D955 |
Melt Flow Rate at 275 ° C, 5 Kg | 26.1 | g/ 10min | ASTM D1238 |
Tensile Strength | 75 | MPa | ASTM D638 |
Tensile Elongation | 4 | % | ASTM D638 |
Flexural Strength | 126 | MPa | ASTM D79D |
Flexural Modulus | 2900 | MPa | ASTM D79D |
Impact Strength. Izod Notched | 65 | J/m | ASTM D256 |
Volume Resistivity | 1000000-10000000 | Ohm*cm | ESD STM 11.12 |
Surface Resistivity | 1000000-10000000 | Ohm/ sq. | ESD STM 11.11 |
Value | Units | Test Method / Conditions | |
Volume Resistance | 2022-10-10 | Ω.cm | ESD STM 11.12 |
Surface Resistivity (Injection Molding) | 106-107 | Ω/sq. | ESD STM 11.11 |
Value | Units | Test Method / Conditions | |
Relative density (23/23°C) | 1.16 | — | ASTM D792 |
Mold Shrinkage | 1.8 | % | ASTM D955 |
Melt Flow lIndex (250°C / 2.16Kg) | 26.1 | g/10min | ASTM D1238 |