Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Form
- Mechanical Properties
- Typical Properties
- Electrical Properties
- Permanence Properties
Value | Units | Test Method / Conditions | |
Tensile Strength | 53.0 | MPa | ASTM D638 |
Tensile Elongation | 14.0 | % | ASTM D638 |
Flexural Strength | 93.0 | MPa | ASTM D790 |
Flexural Modulus | 2350.0 | MPa | ASTM D790 |
Impact Strength, lzod Notched | 246.0 | J/m | ASTM D256 |
Value | Units | Test Method / Conditions | |
Relative Density 23/23°C | 1.16 | — | ASTM D792 |
Mold Shrinkage | 1.43 | % | ASTM D955 |
Melt Flow Rate at 275 ° C, 5 Kg | 17.6 | g/ 10min | ASTM D1238 |
Tensile Strength | 53 | MPa | ASTM D638 |
Tensile Elongation | 14 | % | ASTM D638 |
Flexural Strength | 93 | MPa | ASTM D79D |
Flexural Modulus | 2350 | MPa | ASTM D79D |
Impact Strength. Izod Notched | 246 | J/m | ASTM D256 |
Volume Resistivity | 1000000-10000000 | Ohm*cm | ESD STM 11.12 |
Surface Resistivity | 1000000-10000000 | Ohm/ sq. | ESD STM 11.11 |
Value | Units | Test Method / Conditions | |
Volume Resistivity | 105-107 | Ω.cm | ESD STM 11.12 |
Surface Resistivity (Injection Molding) | 106-10 | Ω/sq. | ESD STM 11.11 |
Value | Units | Test Method / Conditions | |
Relative density (23/23°C) | 1.16 | — | ASTM D792 |
Mold Shrinkage | 1.43 | % | ASTM D955 |
Melt Flow Rate (275°C/ 5Kg) | 17.6 | g/10min | ASTM D1238 |