Products

SERIES 25 SPECIAL ESTERProducts based on special grade saturated polyester. The features are similar to those of Series 20 but are characterized by a higher resistance to hydrolysis failure and improved flexibility at low temperatures.

SERIES 25 SPECIAL ESTERProducts based on special grade saturated polyester. The features are similar to those of Series 20 but are characterized by a higher resistance to hydrolysis failure and improved flexibility at low temperatures.

SERIES 20 STANDARD ESTERProducts based on standard grade saturated polyester. These show strong resilience and tear resistance, excellent abrasion resistance and good stability in water solvents, light and oxidation.

SERIES 20 STANDARD ESTERProducts based on standard grade saturated polyester. These show strong resilience and tear resistance, excellent abrasion resistance and good stability in water solvents, light and oxidation.

SERIES 60 AND 2103 ETHERProducts based on quality polyether. ln comparison with the Ester Series, they show a better resistance to hydrolysis and microbiological attack, a very good cold flexibility but a lower resistance to oxidation.

PRODUCTS FOR GASKETSThese are specially developed TPUs for manufacturing hydraulic gaskets or any other application where at high compression set, resistance to oils and/or high temperatures, is required. Two products based on polycaprolactone (2202-95A and 107- 93A) plus one based on Ether (2203-93A) belong to this group depending on the application.

PRODUCTS FOR GASKETSThese are specially developed TPUs for manufacturing hydraulic gaskets or any other application where at high compression set, resistance to oils and/or high temperatures, is required. Two products based on polycaprolactone (2202-95A and 107- 93A) plus one based on Ether (2203-93A) belong to this group depending on the application.

SERIES 25 SPECIAL ESTERProducts based on special grade saturated polyester. The features are similar to those of Series 20 but are characterized by a higher resistance to hydrolysis failure and improved flexibility at low temperatures.

SERIES 25 SPECIAL ESTERProducts based on special grade saturated polyester. The features are similar to those of Series 20 but are characterized by a higher resistance to hydrolysis failure and improved flexibility at low temperatures.

SERIES 15 AND 18 PLASTICIZED ESTERProducts based on saturated polyester and containing a small amount of plasticizer, they have been specially developed to fill a gap between rubber materials and polyurethanes. They combine to give a very soft grade but with polyurethane 's typical features such as good flexibility and abrasion resistance, while maintaining short processing times. This can be particularly applied to the shoe industry where TPUs guarantee excellent adhesion to the two-component PU without applying any primer.

SERIES 60 AND 2103 ETHERProducts based on quality polyether. ln comparison with the Ester Series, they show a better resistance to hydrolysis and microbiological attack, a very good cold flexibility but a lower resistance to oxidation.

SERIES 50 MODIFIELD ESTERProducts are obtained by homogenously incorporating small quantities of particular technopolymers in some rigid types belonging to the Special Ester Series. They couple their elevated hardness with an excellent cold impact resistance.

SERIES 50 MODIFIELD ESTERProducts are obtained by homogenously incorporating small quantities of particular technopolymers in some rigid types belonging to the Special Ester Series. They couple their elevated hardness with an excellent cold impact resistance.

SERIES 25 SPECIAL ESTERProducts based on special grade saturated polyester. The features are similar to those of Series 20 but are characterized by a higher resistance to hydrolysis failure and improved flexibility at low temperatures.

SERIES 20 STANDARD ESTERProducts based on standard grade saturated polyester. These show strong resilience and tear resistance, excellent abrasion resistance and good stability in water solvents, light and oxidation.

SERIES 25 SPECIAL ESTERProducts based on special grade saturated polyester. The features are similar to those of Series 20 but are characterized by a higher resistance to hydrolysis failure and improved flexibility at low temperatures.

SERIES 15 AND 18 PLASTICIZED ESTERProducts based on saturated polyester and containing a small amount of plasticizer, they have been specially developed to fill a gap between rubber materials and polyurethanes. They combine to give a very soft grade but with polyurethane 's typical features such as good flexibility and abrasion resistance, while maintaining short processing times. This can be particularly applied to the shoe industry where TPUs guarantee excellent adhesion to the two-component PU without applying any primer.

SERIES 60 AND 2103 ETHERProducts based on quality polyether. ln comparison with the Ester Series, they show a better resistance to hydrolysis and microbiological attack, a very good cold flexibility but a lower resistance to oxidation.

SERIES 60 AND 2103 ETHERProducts based on quality polyether. ln comparison with the Ester Series, they show a better resistance to hydrolysis and microbiological attack, a very good cold flexibility but a lower resistance to oxidation.

SERIES 20 STANDARD ESTERProducts based on standard grade saturated polyester. These show strong resilience and tear resistance, excellent abrasion resistance and good stability in water solvents, light and oxidation.

SERIES 20 STANDARD ESTERProducts based on standard grade saturated polyester. These show strong resilience and tear resistance, excellent abrasion resistance and good stability in water solvents, light and oxidation.

SERIES 20 STANDARD ESTERProducts based on standard grade saturated polyester. These show strong resilience and tear resistance, excellent abrasion resistance and good stability in water solvents, light and oxidation.

SERIES 60 AND 2103 ETHERProducts based on quality polyether. ln comparison with the Ester Series, they show a better resistance to hydrolysis and microbiological attack, a very good cold flexibility but a lower resistance to oxidation.

SERIES 50 MODIFIELD ESTERProducts are obtained by homogenously incorporating small quantities of particular technopolymers in some rigid types belonging to the Special Ester Series. They couple their elevated hardness with an excellent cold impact resistance.

SERIES 15 AND 18 PLASTICIZED ESTERProducts based on saturated polyester and containing a small amount of plasticizer, they have been specially developed to fill a gap between rubber materials and polyurethanes. They combine to give a very soft grade but with polyurethane 's typical features such as good flexibility and abrasion resistance, while maintaining short processing times. This can be particularly applied to the shoe industry where TPUs guarantee excellent adhesion to the two-component PU without applying any primer.

SERIES 60 AND 2103 ETHERProducts based on quality polyether. ln comparison with the Ester Series, they show a better resistance to hydrolysis and microbiological attack, a very good cold flexibility but a lower resistance to oxidation.

SERIES 60 AND 2103 ETHERProducts based on quality polyether. ln comparison with the Ester Series, they show a better resistance to hydrolysis and microbiological attack, a very good cold flexibility but a lower resistance to oxidation.

SERIES 25 SPECIAL ESTERProducts based on special grade saturated polyester. The features are similar to those of Series 20 but are characterized by a higher resistance to hydrolysis failure and improved flexibility at low temperatures.

PRODUCTS FOR GASKETSThese are specially developed TPUs for manufacturing hydraulic gaskets or any other application where at high compression set, resistance to oils and/or high temperatures, is required. Two products based on polycaprolactone (2202-95A and 107- 93A) plus one based on Ether (2203-93A) belong to this group depending on the application.

SERIES 25 SPECIAL ESTERProducts based on special grade saturated polyester. The features are similar to those of Series 20 but are characterized by a higher resistance to hydrolysis failure and improved flexibility at low temperatures.

SERIES 15 AND 18 PLASTICIZED ESTERProducts based on saturated polyester and containing a small amount of plasticizer, they have been specially developed to fill a gap between rubber materials and polyurethanes. They combine to give a very soft grade but with polyurethane 's typical features such as good flexibility and abrasion resistance, while maintaining short processing times. This can be particularly applied to the shoe industry where TPUs guarantee excellent adhesion to the two-component PU without applying any primer.

SERIES 60 AND 2103 ETHERProducts based on quality polyether. ln comparison with the Ester Series, they show a better resistance to hydrolysis and microbiological attack, a very good cold flexibility but a lower resistance to oxidation.

SERIES 25 SPECIAL ESTERProducts based on special grade saturated polyester. The features are similar to those of Series 20 but are characterized by a higher resistance to hydrolysis failure and improved flexibility at low temperatures.

SERIES 2102 POLYCAPROLACTONE ESTERProducts based on polycaprolactones. They behave roughly in the same way as TPU in the Special Ester Series but exhibit a higher resistance to hydrolysis failure.

SERIES 60 AND 2103 ETHERProducts based on quality polyether. ln comparison with the Ester Series, they show a better resistance to hydrolysis and microbiological attack, a very good cold flexibility but a lower resistance to oxidation.