Products

Cola®Dry N3 is a 100% active, non-mineral seal oil based drying agent for professional car washes. Cola®Dry N3 can be used in areas where hydrocarbon effluent restrictions are stringent and allow operators to stay within the capacity of current effluent treatment systems.

Cola® Det DEF-40 is an anionic/amido all purpose detergent concentrate that can be easily modified to produce a wide range of low cost high performance products for industrial and household use. Cola® Det DEF-40 is a biodegradable surfactant concentrate that offers maximum cleaning efficiency and excellent physical properties. It is 100% active content, clear and with a low solidification point.

Cola®Terge 226 is an optimized blend of nonionic and cationic surfactants, intended to be used for water-based degreasing. A cleaning formulation based on Cola®Terge 226 can often replace a solvent because of the efficient cleaning effect on grease and oil. When an oily soil contains a lot of soot and pigments, the cleaning effect will often be much better than with conventional products. A water-based alkaline cleaning formulation based using Cola®Terge 226 and appropriate complexing agent is a significant improvement compared with conventional alkaline cleaners.

Cola®Mulse CS300 is a cationic emulsifier designed to enhance water beading and aid drying in rinse aid formulations. To improve sheeting beading balance, Cola®Mulse CS400 or Cola®Mulse CS205 may be used as coemulsifiers.

Cola®Liquid DT-2 is a non-ionic 2:1 diisopropanolamine (DIPA) amide of tall oil fatty acids. Colonial Chemical’s Cola®Liquid products consist of completely liquid, consumer acceptable non-DEA amides that perform like traditional alkanolamide surfactants. Cola®Liquid DT-2 can be used as a substitute for 2:1 DEA amides in any application where traditional alkanolamide surfactants have been used. Cola®Liquid DT-2 is effective in a wide variety of household and industrial products.

Cola®Dry DAB is a water-soluble wax additive used in vehicle care formulations for improved shine and surface protection. Cola®Dry DAB is non-flammable and can be formulated to create high-performance protectants for both exterior and interior vehicle surfaces.

Cola®Solv TES is a cationic additive for improving rinse and drying, reducing static charges on surfaces, preventing corrosion adding lubrication to textiles and brushes and applying shine to hard surfaces.

Cola®Mid 3458 is a linoleic diethanolamide (INCI Designation: Linoleamide DEA) designed to provide excellent foam stabilization, viscosity building, conditioning, and emulsification properties in shampoos, skin cleansers, and other personal care products. For industrial applications, it is an effective thickener and emulsifier for a variety of oils and is useful in the development of micro-emulsion detergent and solvent-based cleaners.

Colonial DF-20 is an anionic modified polyether that behaves as an anionic in alkali concentrates but displays nonionic cloud point behavior in diluted use solutions. This unique surfactant is intended for use in highly alkaline, built liquid cleaner concentrates. Colonial DF-20 exhibits very low foam and excellent hard-surface detergency when used at temperatures above its cloud point in use solutions. It is very eff ective in power-wash metal cleaners, low foam fl oor cleaners, steam cleaners, liquid dishwashing compounds and other low-foam cleaning applications.

Cola®Quat C15 is a naturally-derived ethoxylated quaternary amine at nearly 100% active. When used with other surfactants - especially nonionic surfactants - Cola®Quat C15 will greatly boost degreasing and cleaning performance. It will also help stabilize foam and improve streak-free rinsing. The ethosulfate quats will help reduce the corrosivity found with chloride quats. Cola®Quat C15 may not be compatible with anionic surfactants at high concentrations.

Silicone Wax Additive

Cola®Mulse CS400 is a non-flammable cationic emulsifier designed to create micro emulsions of mineral seal oil and other hydrophobes in water. The combination of this powerful cationic surfactant with the mineral seal oil makes very effective drying agents for automatic car wash systems to remove water with balanced beading and sheeting actions.

The Suga®Fax materials are derived from alkyl polyglucosides, a renewable resource made from coconut oil and corn syrup. These starting materials provide biodegradable, mild surfactants that can function in extreme conditions for a variety of consumer and industrial applications. Because of their safety, Suga®Fax products are excellent in consumer and industrial products, dramatically lowering the risk to human exposure. Suga®Fax surfactants are recommended wherever wetting, hydrotroping, and detergency are needed in a consumer or industrial product.

Cola®Teric CBS is an amphoteric surfactant in the sultaine class. It exhibits outstanding surface activity, wetting, foaming, and compatibility in a wide variety of applications. Due to its amphoteric nature, this product is compatible with cationic, anionic, and nonionic surfactants. The compatibility and stability of formulations containing Cola®Teric CBS are maintained over a broad pH range.

Cola®Mulse CS205 is a non-ionic emulsifier designed to enhance water sheeting and aid drying in rinse aid formulations. Cola®Mulse CS205 may be used as a co-emulsifier with Cola®Mulse CS300.

Cola®Teric 2-COSF is a caprylic imidazoline derived amphoteric surfactant that provides excellent wetting, detergency, rinsibility, and effective hydrotroping properties in a wide range of electrolyte systems. This low to moderate foaming amphoteric is ideally suited for use in household and industrial cleaners, alkaline degreasers, transportation cleaners, and textile/carpet care formulations.

Cola® Det 190 is a highly concentrated, proprietary blend of anionic and nonionic surfactants that can be used as a base for a wide range of dishwash, laundry and other household cleaning products, covering the range from economy to premium formulations.

Cola®Liquid DT is a non-ionic 1:1 diisopropanolamine (DIPA) amide of tall oil fatty acids. Colonial Chemical’s Cola®Liquid products consist of completely liquid, consumer acceptable non-DEA amides that perform like traditional alkanolamide surfactants. Cola®Liquid DT provides viscosity building and foam stabilizing properties. The product is liquid and very mild to eyes and skin. Cola®Liquid DT can be used as a substitute for 1:1 DEA amides in any application where traditional alkanolamide surfactants have been used. Cola®Liquid DT is effective in a wide variety of industrial products.

Cola®Mulse C-356 and Cola®Mulse D-356 are effective emulsifiers for aromatic solvents, kerosene, and mineral spirits. They provide excellent wetting, detergency, and rinsing properties to solvent-based cleaners. These products are ideally suited for use in paint strippers, heavy-duty degreasers, and oil rig cleaners.

Cola®Teric LFM is a low foaming amphoteric surfactant that provides outstanding wetting properties in alkaline detergent formulations and effectively solubilizes conventional ethoxylated nonionics into a wide range of electrolyte systems. Additionally, ColaTeric LFM contributes to detergency and rinsibility. It is ideal for use in wax strippers, heavy-duty degreasers, and CIP cleaners.

Cola®Teric MSC is a low foaming, biodegradable, amphoteric surfactant with excellent detergency, designed for use in either low or high temperature alkaline and acid cleaners. While some foaming occurs in both alkaline and acid cleaners when used in spray tanks, it is fast breaking and does not accumulate. This property can also prove advantageous when formulating "scrub-vac" cleaners such as those used on indoor-outdoor carpeting or hard surfaces. Cola®Teric MSC is an anhydrous, 100% active, liquid material that is ideally suited for use in dry products containing high percentages of caustic, such as heavy duty all-purpose industrial cleaners. In contrast to low foaming nonionic surfactants, Cola®Teric MSC exhibits low foaming properties even at low temperatures while still maintaining good detergent properties. In addition, it has been determined that up to equal parts of nonionics can be combined with ColaTeric MSC without losing these foaming properties. While ColaTeric MSC can be incorporated directly into aqueous alkaline systems, it neutralizes slowly and may take hours to achieve pH equilibrium. Cola®Teric MSC is readily soluble in aqueous acid systems.

Cola®Dry N4 is a 100% active, non-flammable concentrated drying agent for professional car washes. For direct injection, this product can be used at 1500–2000:1 dilution or diluted to different concentrations.

Cola®Teric BW is a low foam alkyl betaine effective in cleaning metals and stain prevention. The composition is free of silicates and suitable for soft metals such as copper, aluminum, or brass. Cola®Teric BW is used in producing highly built cleaners with good detergency and high cloud points.

Cola® Det DEF-45 is a DEA-free citrus oil emulsifier designed to yield micro-emulsions of non-polar solvents. A wide range of hard surface cleaners, waterless hand cleaners, and degreasers can be formulated with this product. It is most effective in blends containing d-limonene, terpenes, naphthenic pine oils and Exxate type solvents. Appropriate blends of these oils can produce highly synergistic cleaners.

Cola®Teric LAB70 UP is a high-foaming amphoteric surfactant that is compatible with anionic, nonionic, cationic and other amphoteric surfactants. Cola®Teric LAB70 UP is based on a renewable vegetable lipid and is biodegradable. It is stable over a wide pH range and provides the formulator with a flexible ingredient for use in many personal care and industrial formulations. Cola®Teric LAB70 UP contains no solvents or VOCs and is shipped unpreserved. Cola®Teric LAB70 UP exhibits a high viscosity build when used with traditional anionics. Cola®Teric LAB70 UP is useful in personal care products under both high and low pH conditions. It features exceptional mildness and exhibits modest conditioning action in hair shampoos, conditioner and skin cleansers. Household cleaning formulations can benefit from the superior coupling performance for improved detergency, foam stabilizing and ingredient compatibility. At 10% active, Cola®Teric LAB70 UP exhibits very low toxicity, causes minimal eye irritation and is not considered a primary dermal irritant.

Cola®Mine 1281 is a unique 2:1 modified alkanolamide. This product is finding wide use in industrial hard surface cleaners, such as strippers and degreasers. ColaMine 1281 is biodegradable and is well suited for formulating "Green Cleaners".

Cola®Liquid DCM is a DEA-free fatty amide blend designed for incorporation into most water dilutable products. In addition to corrosion inhibition, Cola®Liquid DCM provides high detergency for effective cleaning, and prevents soil from re-depositing after being loosened. The unique wetting properties are intended to allow dispersion over oily surfaces without creeping under and loosening flooring adhesives. The high viscosity of Cola®Liquid DCM delivers a thick, pleasing consistency for formulations, and the controlled foam provides satisfactory suds without disproportionate volume.

Cola®Terge APDC is a cost effective, 100% active, liquid detergent concentrate that can be readily diluted and modified to develop a wide range of low cost, yet high performance household and industrial products. Cola®Terge APDC contributes high foaming, detergency, low irritation and excellent hard water tolerance. It is ideal for use in hand soaps, all purpose cleaners, and solvent cleaners.

Cola® Mine 11CM-MOD is Coconut Diethanolamide, Modified.

Cola®Dol 901 is a multifunctional nonionic surfactant and provides better degreasing and cleaning than NPE surfactants or other NPE-alternatives. Cola®901 is formulated to be highly compatible with other surfactants and solvents, and highly effective in use, providing excellent cleaning and degreasing at reduced concentrations. Cola®901 performs as well as standard nonionic surfactants, but off ers outstanding cleaning performance and a favorable environmental profile.

Cola®Teric ZF-50 is an extremely versatile, non-foaming amphoteric surfactant that provides excellent hydrotroping properties over a wide range of electrolyte concentrations. It effectively couples conventional and capped low foaming nonionics into heavy duty built alkaline cleaner formulations. Cola®Teric ZF-50 can be used in mixed anionic/nonionic systems to control the Krafft point and cloud point. Cola®Teric ZF-50 is ideally suited for use in household and industrial detergent cleaners such as bottle washing, high pressure spray cleaners, alkaline degreasers, scrubbing compounds, acid cleaners, transportation cleaners and various other hard surface detergent formulations.

Cola®Dol 902 is a multifunctional non-ionic surfactant and provides better degreasing and cleaning than NPE surfactants or other NPE-alternatives. Cola®Dol 902 is formulated to be highly compatible with other surfactants and solvents, and highly effective in use, providing excellent cleaning and degreasing at reduced concentrations.

Cola® Det DEF-100 is a DEA-free, MEA-free anionic all-purpose detergent concentrate that can be easily modifi ed to produce a wide range of low cost high performance products for household and industrial use. Cola® Det DEF-100 is a biodegradable surfactant concentrate that offers maximum cleaning efficiency and excellent physical properties. It is 100% active content, clear and with a low freeze point.

The Suga®Fax materials are derived from alkyl polyglucosides, a renewable resource made from coconut oil and corn syrup. These starting materials provide biodegradable, mild surfactants that can function in extreme conditions for a variety of consumer and industrial applications. Because of their safety, Suga®Fax products are excellent in consumer and industrial products, dramatically lowering the risk to human exposure. Suga®Fax surfactants are recommended wherever wetting, hydrotroping, and detergency are needed in a consumer or industrial product.

Cola®Mulse CS450 is a non-flammable cationic emulsifier designed to create microemulsions of mineral seal oil and other hydrophobes in water. The combination of this powerful cationic surfactant with the mineral seal oil makes very effective drying agents for automatic car wash systems to remove water with balanced beading and sheeting actions.

Cola®Teric CYAB is a low foaming amphoteric with excellent coupling properties for industrial products. It provides good detergency in systems that require high cloud points and acts as an effective hydrotrope to couple nonionic surfactants into systems containing moderate amounts of electrolyte. This lower chain length betaine offers low foam at high and low pH ranges is useful for improved detergency.