Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- Features
- Glass Fiber reinforcement 20%
- Electrically Conductive
- High Mechanical Properties
- Lower Shrinkage
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Uses
- Automotive applications
- Industrial Parts
- Electronics & electrical applications
- Processing Method
Injection Molding
Properties
- Flame Rating
- Mechanical Properties
- Typical Properties
- Electrical Properties
- Flammability
| Value | Units | Test Method / Conditions | |
| Tensile Strength | 70 | MPa | ASTM D638 |
| Tensile Elongation Break | 2 | % | ASTM D638 |
| Flexural Modulus | 6650 | MPa | ASTM D790 |
| Flexural Strength | 115 | MPa | ASTM D790 |
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.51 | g/cm3 | ASTM D792 |
| Molding Shrinkage (3.2 mm) | 0.20 - 0.60 | % | ASTM D955 |
| Notched Izod Impact (23°C) | 50 | J/m | ASTM D256 |
| Drying Temperature | 120 | °C | - |
| Drying Time | 4 - 6 | hr | - |
| Rear Temperature | 240 - 245 | °C | - |
| Middle Temperature | 245 - 250 | °C | - |
| Front Temperature | 250 - 255 | °C | - |
| Nozzle Temperature | 255 - 260 | °C | - |
| Processing (Met) Temp | 240 - 260 | °C | - |
| Mold Temperature | 80 - 100 | °C | - |
| Value | Units | Test Method / Conditions | |
| Surface Resistivity | 10^3 - 10^5 | ohms | ASTM D257 |
| Value | Units | Test Method / Conditions | |
| Flame Rating (1.6 mm) | HB | - | UL94 |
Regulatory & Compliance
- Certifications & Compliance