Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Features
- Flame retardant
- Ignition resistance
- Balance of strength
- Excellent processing
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Uses
- Electrical electronic applications
- Connectors
- Automotive applications
- Processing Method
Injection Molding
Properties
- Flame Rating
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Flammability
| Value | Units | Test Method / Conditions | |
| Tensile Modulus | 12200 | MPa | ASTM D638 |
| Tensile Strength | 165 | MPa | ASTM D638 |
| Tensile Elongation Break | 2.2 | % | ASTM D638 |
| Flexural Modulus | 8690 | MPa | ASTM D790 |
| Flexural Strength | 239 | MPa | ASTM D790 |
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.56 | g/cm3 | ASTM D792 |
| Molding Shrinkage (3.2 mm) | 0.50 - 0.60 | % | ASTM D955 |
| Water Absorption - 24hr | 1.4 | % | ASTM D570 |
| Notched Izod Impact (23°C) | 94 | J/m | ASTM D256 |
| Drying Temperature | 80 - 100 | °C | — |
| Drying Time | 4 - 6 | hr | — |
| Rear Temperature | 230 - 240 | °C | — |
| Middle Temperature | 240 - 250 | °C | — |
| Front Temperature | 250 - 260 | °C | — |
| Nozzle Temperature | 260 - 270 | °C | — |
| Mold Temperature | 80 - 100 | °C | — |
| Value | Units | Test Method / Conditions | |
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 4.0 mm) | 250 | °C | ASTM D648 |
| Value | Units | Test Method / Conditions | |
| Flame Rating (1.6 mm) | V-0 | — | UL94 |
Regulatory & Compliance
- Certifications & Compliance