Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- Low foaming action, Final Strip Plus can be applied with an automatic scrubber.
- Will remove multiple layer of floor finish in one easy application.
- Requires only 5 - 10 minutes of setting time before agitation.
- Final Strip Plus is a fast and effective finish and wax remover that does not require a rinse before applying floor fi nish. Simply apply and remove by mop, wet vac or automatic scrubber.
- Saves time and labor by eliminating the need to rinse.
- Highly concentrated and economical.
- Fast penetration and stripping action.
- Removes all detergent resistant metal interlock polymers, alkali soluble resins and emulsifi ed wax systems.
Applications & Uses
- Markets
- Applications
- Application Method
- Directions For Use
Be sure to follow directions completely:
- Dust floor and remove gum, soils, etc. Protect furniture and walls.
- Dilute stripper with hot water from 1:4 to 1:10 for manual stripping depending on fi nish build-up. For automatic scrubbers, dilute up to 1:10.
- Note - Higher concentrations will increase stripping speed and reduce job time.
- Apply diluted stripper generously to the floor with a clean mop or spray device to thoroughly wet all surfaces. For Mop-On, Mop-Off Stripping: Allow the solution to stand and soak on the floor for 5 to 10 minutes, to chemically attack, “whiten” and lift fi nish and wax coating. Do not allow the floor to dry. Then follow Step 5.
- For faster fi nish removal: Scrub with a brush or a machine with a stripping pad to break up and solubilize floor coating. Allow the solution to remain an additional 3 to 5 minutes after scrubbing.
- Pick up solution THOROUGHLY with a mop, squeegee, wet vacuum or automatic scrubber. NOTE: Extra care should be taken in this step. Failure to thoroughly remove solubilized fi nish and stripper solution may result in unsatisfactory results from the new application of fi nish.
- Allow the floor to dry completely. Once the entire floor has been stripped, dust mop completely using a clean, dry dust mop. Apply finish.
- Area of Use
- Schools
- Universities
- Municipalities
- Hotels
- Motels
- Daycare centers
- Government agencies
- Churches
- Apartment buildings
- Nursing homes
Properties
- Physical Form
- Fragrance
- Mild
- Soluble in
- Water
- Typical Properties
Value | Units | Test Method / Conditions | |
Weight | 8.75 | lb/gal | - |
pH | 13.0 | - | - |
Dilution | 1:4 - 1:10 | - | - |
Packaging & Availability
- Packaging Type
- Available Packaging
- 55 gal - #00319
- 35 gal - #00318
- 20 gal - #00317
- 6 gal - #00316
- 1 gal - #00315