Products

LUBIMAX® AW 2236 is a C3 and C6 secondary zinc dialkyldithiophosphate (ZDDP) anti-wear additive to formulate diesel and gasoline crankcase lubricant oils with suitable base stocks. It has an excellent protection against corrosion, oxidation and wear in internal combustion engine components. LUBIMAX® AW 2236 additive is also recommended for use in industrial fluids and greases.

LUBIMAX® 5535L additive is a liquid viscosity index improver intended for use in both, multigrade and monograde engine oil applications. LUBIMAX® 5535L imparts excellent shear stability (SSI = 35) and low temperature properties to passenger car motor oils and heavy duty engine oils. LUBIMAX® 5535L performs very well in a wide range of base oils.

LUBIMAX® 2571 is a premium quality proprietary synthetic copolymer-based pour point depressant with excellent compatibility with OCP/EPM based viscosity index improvers and viscosity modifiers. LUBIMAX® 2571 has been tested extensively with all commonly available base stocks and has been shown to improve crankcase and industrial lubricating oils performance at low temperature. LUBIMAX® 2571 is compatible with all additives conventionally used for such formulations.

LUBIMAX® E117 is a high performance synthetic base fluid suitable for use in a wide range of applications as a base fluid.

LUBIMAX® 411H is a premium quality, over-based calcium sulfonate TBN Booster additive that is typically used as a detergent and rust inhibitor in crankcase lubricants with suitable base stocks. Compared to other products from the same family, LUBIMAX® 411H enjoys lighter color and lower haziness, with strong acid neutralizing ability, detergency and dispersion effects as well as anti-rust performance. The product compatibility is tested and approved with Base Oil Group I, II, III & IV. In addition, it has excellent high temperature and hydrolytic stability.

LUBIMAX® 411M is a high base magnesium sulfonate TBN Booster. It’s compatible with most mineral base oils, white oils and synthetic base stocks. LUBIMAX® 411M has a strong acid neutralizing ability, detergency & dispersion effects and antirust performance as well. It also has excellent stability at high temperature, oil stability, hydrolysis stability and water tolerance ability.

LUBIMAX® 5524L1 is a liquid viscosity index improver intended for use in both multi-grade and monograde engine oil applications. LUBIMAX® 5524L1 imparts excellent shear stability and thickening properties for the formulation of crankcase oils. LUBIMAX® 5524L1 performs very well in a wide range of base oils and provides excellent low temperature properties.

LUBIMAX® LN 15 is a shear stable linear styrenic type VI improver which may be used to formulate multi grade crankcase and industrial oils. It has good low temperature properties when combined with a proper pour point depressant. LUBIMAX® LN 15 is available in powder form.

LUBIMAX® 1606E is a cost-effective cascading additive package developed to cover most gasoline and diesel engine oil applications. This versatile product covers a wide range of current and obsolete API performance levels as well as JASO MA performance requirements.

LUBIMAX® AW 2138 is a C3 and C8, secondary and primary zinc dialkyldithiophosphate (ZDDP) anti-wear additive to formulate diesel and gasoline crankcase lubricant oils with suitable base stocks. It has an excellent protection against corrosion, oxidation and wear in internal combustion enginecomponents. LUBIMAX® AW 2138 additive is also recommended for use in industrial fluids and greases.

LUBIMAX® AFS 125 is a polydimethylsiloxane based Anti-Foaming additive package that is typically used in non-aqueous systems. LUBIMAX® AFS 125 has excellent freezing point, Viscosity Index and strong chemical, mechanical and thermal stability.

LUBIMAX® 2510 is a highly effective pour point & CFPP depressant for Diesel & HSD oil. LUBIMAX® 2510 is based on a fatty ester copolymer.

LUBIMAX® 6540 is a OCP type Viscosity Modifier used in formulating automotive and industrial oils. This VM has excellent viscosity effectiveness in different base stocks. LUBIMAX® 6540 presents good low temperature properties when combined with suitable pour point depressant like LUBIMAX® 2591.

LUBIMAX® AW 1148 is a C4 and C8 Primary Zinc Dialkyldithiophosphate (ZDDP) anti-wear additive to formulate diesel and gasoline crankcase lubricant oils with suitable base stocks. It has an excellent protection against corrosion, oxidation and wear in internal combustion engine components. LUBIMAX® AW 1148 additive is also recommended for use in industrial fluids and greases.

LUBIMAX® 1603B1 is a performance booster for LUBIMAX® 1603HT additive package to formulate mid-tier crankcase lubricant oils for both diesel and gasoline engines. Adding this booster to LUBIMAX® 1603HT additive package can help to achieve API SG/CD, CF-4/SG, SJ/CF/CF-4 and SL/CF.

LUBIMAX® 2591 is a highly efficient proprietary synthetic, copolymer-based pour point depressant used to formulate engine, driveline and industrial lubricants with suitable base stock. LUBIMAX® 2591 has a higher level of polymer content compared to other PPDs available in the market. It has been tested with all commonly available base stocks and has shown drastic improvement in performance of crankcase and industrial lubricating oils at low temperature. LUBIMAX® 2591 is compatible with all additives conventionally used for such formulations.

LUBIMAX® 141L additive is a liquid viscosity index improver intended for use in both, multigrade and monograde engine oil applications. LUBIMAX® 141L imparts excellent shear stability (SSI = 37) and low temperature properties to passenger car motor oils and heavy duty engine oils. LUBIMAX® 141L performs very well in a wide range of base oils.

LUBIMAX® E125 is a high performance synthetic base fluid suitable for use in a wide range of applications as a base fluid, particularly where incidental food contact may occur.

LUBIMAX® 218AP Calcium Alkyl Phenate additive is used in combination with other additives to produce a lubricant additive package for gasoline and diesel engines.

LUBIMAX® ST 26 is a star shaped polymer intended for use as a VI improver when formulating multi grade engine oil and industrial oils. It has good low temperature properties when combined with a proper pour point depressant. LUBIMAX® ST 26 is sold in the form of powder or fluffy granule, with low dissolving temperature and fast dissolving rate when blending with lubricating oil.

LUBIMAX® 5524L9 additive is a liquid viscosity index improver intended for use in both, multigrade and monograde engine oil applications. LUBIMAX® 5524L9 imparts excellent shear stability (SSI = 24) and low temperature properties to passenger car motor oils and heavy duty engine oils. LUBIMAX® 5524L9 performs very well in a wide range of base oils.

LUBIMAX® 12-Hydroxyl stearic acid is used in the manufacture of lubricating greases.

LUBIMAX® 5535 is a shear stable amorphous olefin copolymer intended to be used as a Viscosity Index Improver when formulating multi-grade crankcase and industrial oils. This viscosity modifier combines excellent viscometric effectiveness with high oxidation stability. LUBIMAX® 5535 has very good low temperature properties when combined with suitable pour point depressant.

LUBIMAX® 5524HL9 additive is a liquid viscosity index improver intended for use in both, multi-grade and monograde engine oil applications. LUBIMAX® 5524HL9 imparts excellent shear stability (SSI = 24) and low temperature properties to passenger car motor oils and heavy-duty engine oils. LUBIMAX® 5524HL9 performs very well in a wide range of base oils.

LUBIMAX® HY 564 is an antiwear hydraulic oil package designed to meet and exceed performanc requirements of all major hydraulic equipment manufacturers and industry organization standards. LUBIMAX® HY564 provides excellent antiwear properties, high temperature stability and gooddemulsification and air releasing property leading to enhanced equipment protection. For all HL, HM and HLapplications and with a suitable Viscosity Index Improver, HV and HVLP levels can be attained.

LUBIMAX® 4538S is an alkyl methacrylate co-polymer in a highly refined mineral oil. LUBIMAX® 4538S provides exceptional thickening efficiency for all types of base oils. It is targeted for use in applications where viscosity increase is more emphasized than shear stability. LUBIMAX® 4538S offers a balance between thickening efficiency and shear stability. Used in combination with a proper Pour Point Depressant, formulators can achieve optimal low-temperature viscosity and pour point.

LUBIMAX® 5524HL1 additive is a liquid viscosity index improver intended for use in both, multi-grade and monograde engine oil applications. LUBIMAX® 5524HL1 imparts excellent shear stability (SSI = 24) and low temperature properties to passenger car motor oils and heavy-duty engine oils. LUBIMAX® 5524HL1 performs very well in a wide range of base oils.

LUBIMAX® 1609 is a high-performance additive package for formulating high quality crankcase oils with suitable base stocks. It is especially designed to provide superior deposit control, wear and rust control of engine components. Also, it meets the requirements of API SN, SM and SL in different base oils for a wide range of viscosity grades.

LUBIMAX® AW 2266 is a C6 secondary zinc dialkyldithiophosphate (ZDDP) anti-wear additive to formulate diesel and gasoline crankcase lubricant oils with suitable base stocks. It has an excellent protection against corrosion, oxidation and wear in internal combustion engine components. LUBIMAX® AW 2266 additive is also recommended for use in industrial fluids and greases.

LUBIMAX® SSA 5000 is a seal conditioning additive for automotive and industrial lubricant.it enables formulators to condition seals at an equivalent rate to phthalates ester typically used with nonpolar base fluids.

LUBIMAX® 5524H is a shear stable amorphous olefin copolymer intended for use as a VI improver when formulating multi grade crankcase and industrial oils. Its shear stability makes it suitable for use as shear stable VII. It has good low temperature properties when combined with a proper pour point depressant like LUBIMAX® 2591 or LUBIMAX® 2571. LUBIMAX® 5524H is available as a solid polymer in bale form.

LUBIMAX® 181 is an ethylene propylene copolymer Viscosity Index Improver used in formulating automotive and industrial oils. This VII in pellet form, present high oil solubility in different base stocks and excellent viscosity effectiveness. LUBIMAX® 181 present very good low temperature properties when combined with suitable pour point depressant like LUBIMAX® 2571.

LUBIMAX® 240 is a Viscosity Index improver used to formulate multi grade crankcase and industrial oils. This VII in pellet form, present high oil solubility in various types of base stocks and provide good viscosity effectiveness. LUBIMAX® 240 has very good low temperature properties when combined with suitable pourpoint depressants like LUBIMAX® 2591. The product has good shear stability.

LUBIMAX® G 336 is a premium quality gear oil additive package used to formulate both automotive and industrial gear oils with suitable base stocks. LUBIMAX® G 336 is designed to provide a superior performance of extreme pressure, rust protection, corrosion protection, thermal and oxidation stability.

LUBIMAX® 285AP Calcium Alkyl Phenate additive is used in combination with other additives to produce a lubricant additive package for gasoline and diesel engines.

LUBIMAX® 181L additive is a liquid viscosity index improver intended for use in both, multi-grade and monograde engine oil applications. LUBIMAX® 181L imparts excellent shear stability (SSI = 24) and low temperature properties to passenger car motor oils and heavy-duty engine oils. LUBIMAX® 181L performs very well in a wide range of base oils.