Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Technologies
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
- Diaphragms
- Seals & Gaskets
- Tubing
- Industrial Applications
- Processing Methods
- Extrusion
- Injection Molding
- Blow Molding
Properties
- Color
- Appearance
- Pellet
- Physical Properties
- Mechanical Properties
- Typical Properties
- Heat Resistance Properties
- Processing Parameters
Value | Units | Test Method / Conditions | |
Hardness (15 sec) | 78.0 | Shore A | ASTM D2240 |
Specific Gravity | 0.96 | - | ASTM D792 |
Value | Units | Test Method / Conditions | |
Ultimate Tensile Strength | 1230 (8.5) | psi | ASTM D412 |
Ultimate Elongation | 590.0 | % | ASTM D412 |
Modulus (100%) | 508 (3.5) | psi | ASTM D412 |
Tear Strength | 165 (29) | Ibf/in | ASTM D624 |
Compression Set (22 hrs, 73°F) | 30.0 | % | ASTM D395 |
Value | Units | Test Method / Conditions | |
Drying Temperature | 180.0 | F | - |
Drying Time | 3.0 | hrs | - |
Suggested Maximum Moisture | 0.08 | % | - |
Value | Units | Test Method / Conditions | |
Tensile Strength (302°F, 168 hrs) | -12.0 | Change % | ASTM D573 |
Elongation (302°F, 168 hrs) | -15.0 | Change % | ASTM D573 |
Value | Units | Test Method / Conditions | |
Nozzle Temperature | 370 - 430 | °F | - |
Front Temperature | 360 - 400 | F | - |
Middle Temperature | 360 - 390 | F | - |
Rear Temperature | 350 - 380 | F | - |
Mold Temperature | 50 - 125 | F | - |
Injection Speed | Middle to High | - | - |
Vent Depth | 0.025 | mm | - |
Mold Shrinkage | 15 - 25 | % | - |
Regulatory & Compliance
- Certifications & Compliance
- Compliance
RoHS Compliant.