Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Core Type
- Composite Materials Functions
- CAS No.
- 9002-86-2
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Composites End Use
- Composites Processing Methods
- Processing Information
- Hand lamination / spray lay-up
- Vacuum infusion
- Resin injection
- Adhesive bonding
- Pre-preg processing (up to 80 °C, 176 °F)
- Thermoforming
- Recommended Applications
- Marine: hulls, decking, bulkheads, interiors superstructures
- Transportation: floors, ceilings, doors, interiors, partition walls, sidewalls
- Wind energy: rotor blades, covers, casings
- Aerospace: fuselage and wind components, kitchen trolleys, galleys
- Industrial: Covers, Containers, Tanks, Sporting goods, Tooling and Molds
Properties
- Physical Form
- Mechanical Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Thermal Conductivity (at 75°F) | 0.21 (0.031) | BTU.in/ft2.hr.°F (W/m.K) | ASTM C-177 |
| Shear elongation at break | 13 | % | ASTM C273 |
| Shear Modulus | 3046 (21) | psi (mPa) | ASTM C273 |
| Standard Sheet Length (Plain) | 96.45 (2450) | inch (mm) | — |
| Standard Sheet Width (Plain) | 45.27 (1150) | inch (mm) | — |
| Tensile Modulus | 15374 (106) | psi (mPa) | ASTM D1623 |
| Shear Strength | 112 (0.77) | psi (mPa) | ISO 1922 |
| Compressive Strength | 139 (0.96) | psi (mPa) | ASTM D1621-10 |
| Standard Sheet Thickness (Plain) | 1/8 to 2 ₃/₄ (3 to 70) | inch (mm) | — |
| Tensile Strength | 306 (2.11) | psi (mPa) | ASTM D1623 |
| Compressive Modulus | 6672 (0.46) | psi (mPa) | ASTM D1621-10 |
| Density | 3.75 (60) | Lbs./cu.ft (Kg./m³) | ASTM D1622 |
| Value | Units | Test Method / Conditions | |
| Density Tolerance | ±10 | % | — |
| Water Absorption | max. 1 | % | — |
| Processing Temperature | 176 (80) | °F (°C) | — |