Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Core Type
- Composite Materials Functions
- CAS No.
- 9002-86-2
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Composites End Use
- Composites Processing Methods
- Recommended Applications
- Marine: hulls, decking, bulkheads, interiors superstructures
- Transportation: floors, ceilings, doors, interiors, partition walls, sidewalls
- Wind energy: rotor blades, covers, casings
- Aerospace: fuselage and wind components, kitchen trolleys, galleys
- Industrial: Covers, Containers, Tanks, Sporting goods, Tooling and Molds
- Processing Information
- Hand lamination / spray lay-up
- Vacuum infusion
- Resin injection
- Adhesive bonding
- Pre-preg processing (up to 80 °C, 176 °F)
- Thermoforming
Properties
- Physical Form
- Mechanical Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Standard Sheet Thickness (Plain) | 1/8 to 2 ¾ (3 to 78) | inch (mm) | — |
| Compressive Modulus | 9427 (65) | psi (MPa) | ISO 844 |
| Density | 3.75 (60) | Lbs./cu.ft (Kg. / m3) | ISO 845 |
| Tensile Modulus | 14069 (97) | psi (MPa) | ASTM D1623 |
| Standard Sheet Width (Plain) | 45.28 (1120) | inch (mm) | — |
| Standard Sheet Length (Plain) | 62.99 (2400) | inch (mm) | — |
| Shear Modulus | 3046 (21) | psi (mPa) | ISO 1922 |
| Shear elongation at break | 29 | % | ISO 1922 |
| Tensile Strength | 287 (1.98) | psi (MPa) | ASTM D1623 |
| Shear Strength | 125 (0.86) | psi (MPa) | ISO 1922 |
| Compressive Strength | 1.46 (1.01) | psi (MPa) | ISO 844 |
| Value | Units | Test Method / Conditions | |
| Density Tolerance | ±10 | % | — |
| Water Absorption | max. 1 | % | — |
| Processing Temperature | 285 (140) | °F (°C) | — |