Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Core Type
- Composite Materials Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Composites End Use
- Composites Processing Methods
- Applications
- Marine : nacelles, decking, interiors superstructures
- Transportation : ceilings, doors, interiors, partition walls, sidewalls
- Wind Energy : rotor blades, nacelles, covers, casings
- Aerospace : kitchen trolleys, galleys
- Industrial : Covers, Containers, Tanks, Sporting goods, Tooling and Molds
Properties
- Mechanical Properties
Value Units Test Method / Conditions Compressive Modulus 18130 (125) psi (mPa) ASTM D1621-10 Compressive Strength 396 (2.73) psi (mPa) ASTM D1621-10 Density 8.12 (130) Lbs. / cu.ft (Kg. / m3) ASTM D1622 Shear Elongation at Break 32 (32) % (%) ASTM C273 Shear Modulus 7107 (49) psi (mPa) ASTM C273 Shear Strength 294 (2.03) psi (mPa) ASTM C273 Standard Sheet Plain (Length) 74.80 (1900) inch (mm) Length Standard Sheet Plain (Thickness) 1/8 - 2 (3 - 51) inch (mm) Thickness Standard Sheet Plain (Width) 33.47 (850) inch (mm) Width Tensile Modulus 13198 (91) psi (mPa) ASTM D1623 Tensile Strength 442 (3.05) psi (mPa) ASTM D1623 Thermal Conductivity (at 75°F) 0.27 (0.039) BTU.in/ft2.hr.°F (W/m.K) ASTM C-177 - Typical Properties
Value Units Test Method / Conditions Density Tolerance ± 10 % - Processing Temperature 176 (80) °F (°C) - Water Absorption max. 1 % -
Technical Details & Test Data
- Processing
- Hand lamination / spray lay-up
- Vacuum infusion
- Resin injection
- Adhesive bonding
- Pre-preg processing (up to 80 °C, 176 °F)
- Thermoforming