Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features & Benefits
- Abrasion resistant
- Chemical resistant
- Water resistant
- Low VOC
- Brush, roll, or spray application
Applications & Uses
- Applications
- Application Area
- Uses
- Equipment
- Walls
- Handrails
- Machinery
- Floors
Properties
- Physical Properties
| Value | Units | Test Method / Conditions | |
| Product Code (Part A ) | 96-4450 | — | — |
| Product Code (Part B ) | 96-0228 | — | — |
| Volume Solids (Part A) | 43.3 - 47.3 | % | — |
| Volume Solids (Part B) | 37 - 41 | % | — |
| Volume Solids (Blended) | 41.2 - 45.2 | % | — |
| Gloss (60°C, 1-1.5 mils DFT) | min. 70 | — | — |
| Mixing Ratio (2 parts) | 96-4450 | — | — |
| Mixing Ratio (1 part) | 96-0228 | — | — |
| Viscosity (77 °F, blended by volume) | 20 - 27 | seconds | #3 Zahn Signature Cup |
| VOC (Part A) | 1.45 | lbs/gal | — |
| VOC (Blended) | 0.97 | lbs/gal | — |
| Spreading Rate (1 mil DFT) | 692.0 | sq ft/gal | — |
| Recommended DTM film thickness (Mils Wet) | 4.0 - 5.0 | mils | — |
| Recommended DTM film thickness (Miles Dry) | 1.6 - 2.0 | mils | — |
| Recommended DTM film thickness | max. 6 | mils | — |
| Drying (Set to Touch) | 10 - 15 | minutes | — |
| Drying (Tack Free) | 20 - 25 | minutes | — |
| Drying (To Handle) | 1 - 2 | hours | — |
| Drying (Total full pronerties) | 24.0 | hours | — |
| Working Potlife (75°F) | 1.5 | hours | — |
| Working Potlife (85°F) | 10.0 | hours | — |
Packaging & Availability
- Available Colors
Available in white, light gray, safety yellow, and hundreds of custom colors.