Knowde Enhanced TDS
Identification & Functionality
- Backing Material Type
- Product Type
- Technologies
- Product Families
- Product Construction
Backing Adhesive Liner MT Polyimide Film None None
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
The Thermal Conductive MT Polyimide Film : The thermal conductive MT polyimide film series is enhanced with thermal conductivity properties. Its excellent combination of electrical properties, thermal conductivity and mechanical toughness make it ideal for electronic and heat management applications.
- Thermal Conductive
- Excellent electrical properties
- High-Temperature Resistance
Thermal conductive MT polyimide film is a homogeneous film possessing high thermal conductivity, while also maintaining the excellent electrical, physical and mechanical strength of standard polyimide film. These properties make it ideal for applications requiring efficiency in transferring thermal energy, such as loudspeaker voice coils’ frames, electrical insulating pads and flexible printed boards. The film can also be coated with FEP fluoropolymer resin or pressure sensitive adhesives.
Applications & Uses
- Applications
- Application Area
- Product End Uses
- Applications
CGS MT polyimide film can be used in
- Printed circuit board
- Insulation pads
- Heater circuits
- Power supplies and ceramic board replacement
Properties
- Typical Properties
- Note
The following data are nominal values based on PSTC, ASTM and other standard tests. The data should not be considered as specifications
| Value | Units | Test Method / Conditions | |
| Total Thickness | 1.0 | mil | ASTM D-3652 |
| Tensile Strength (Machine Direction) | min. 150 | Mpa | ASTM D-882 |
| Tensile Strength (Traverse Direction) | min. 110 | Mpa | ASTM D-882 |
| Elongation (at Rupture) | 40.0 | % | ASTM D-882 |
| Breakdown Strength | min. 4000 | volts/mil | ASTM D-149 |
| Surface Resistivity | min. 10¹⁵ | Ω | ASTM D-257 |
| Volume Resistivity | min. 10¹⁶ | Ohm.cm | ASTM D-257 |
| Dielectric Constant (at 1khz) | 3 - 4 | — | ASTM D-150 |
| Thermal Conductivity | 0.36 | W/m.k | ASTM D-5470 |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
- RoHs/REACH Compliant
This Product Complies with the European Union’s “Restriction of Hazardous Substances” (RoHs) initiative and with European REACH regulation.
- Government Compliant
Mil- P - 46112B/ ASTM D 5213 , Type 2, Item 2