company tower banner

Cri-Line

Cri-Tech, Inc. Brand

Supplier:Cri-Tech, Inc.

Products:85

The Cri-Line® compounds described in this site are fully formulated high performance compounds, developed, tested and guaranteed by Cri-Tech, Inc. These Product Selection pages will enable you to quickly locate compounds that meet your specifications. Compounds are grouped by product type/families. Among them are products for most major FKM end-use applications and manufacturing processes. Cri-Line® FKM compounds range from 50 to 95 durometer, 65% to 71% Fluorine, bisphenol or peroxide cure system, and specialty grades such as BRE (base resistant) and low temperature. Compounds are generally supplied in several standard colors, but can be customized to support any color program. A Cri-Line® compound that you have ordered will arrive at your receiving dock accompanied by a certificate of compliance (including test data) for the lot shipped and ready for immediate processing without further modification.

View All Cri-Line Products

Cri-Line™ FDA-715-WH

Polymer Name:Fluoroelastomer (FKM)
Features:Food Contact Acceptable

66% Fluorine copolymers formulated with compounding ingredients approved for food contact (U.S. FDA 21 CFR 177.2600(c)(4)(1) listed). FDA compounds are also available in a variety of colors.

Cri-Line™ HFLT-615

Polymer Name:Fluoroelastomer (FKM)
Features:Low Temperature Flexibility

High fluorine tetrapolymers formulated for low temperature flexibility. HFLT compounds are excellent choices for fuel applications, including methanol-containing fuels, where low temperature flexibility is also essential. The LT compounds are designed for low temperature applications.

Cri-Line™ LC-615-65-THK

Polymer Name:Fluoroelastomer (FKM)
Processing Methods:Injection Molding
Features:Bondability

66% Fluorine copolymers formulated for low cost. LC-THK compounds are fissure resistant in thick cross sections; these compounds also exhibit enhanced rubber-to-metal bonding.

Cri-Line™ LC-608

Polymer Name:Fluoroelastomer (FKM)
Processing Methods:Injection Molding

66% Fluorine copolymers formulated for low cost. LC compounds are used in lathe cut and custom molded goods, including value stem seals.

Cri-Line™ GP-615

Polymer Name:Fluoroelastomer (FKM)
Processing Methods:Injection Molding
Features:General Purpose

66% Fluorine copolymers formulated for molding complex geometric shapes. GP compounds exhibit improved hot tear resistant properties and offer a variety of colors.

Cri-Line™ FDA-718-BR

Polymer Name:Fluoroelastomer (FKM)
Features:Food Contact Acceptable

66% Fluorine copolymers formulated with compounding ingredients approved for food contact (U.S. FDA 21 CFR 177.2600(c)(4)(1) listed). FDA compounds are also available in a variety of colors.

Cri-Line™ GP-615-65-LV

Polymer Name:Fluoroelastomer (FKM)
Processing Methods:Injection Molding
Features:General Purpose, Low Viscosity

66% Fluorine copolymers formulated for injection molding. GP-LV compounds also exhibit the improved hot tear resistance of their higher viscosity counterparts.

Cri-Line™ FDA-615-65-WH

Polymer Name:Fluoroelastomer (FKM)
Features:Food Contact Acceptable

66% Fluorine copolymers formulated with compounding ingredients approved for food contact (U.S. FDA 21 CFR 177.2600(c)(4)(1) listed). FDA compounds are also available in a variety of colors.

Cri-Line™ GP-612-LV

Polymer Name:Fluoroelastomer (FKM)
Processing Methods:Injection Molding
Features:General Purpose, Low Viscosity

66% Fluorine copolymers formulated for injection molding. GP-LV compounds also exhibit the improved hot tear resistance of their higher viscosity counterparts.

Cri-Line™ FDA-715

Polymer Name:Fluoroelastomer (FKM)
Features:Food Contact Acceptable

66% Fluorine copolymers formulated with compounding ingredients approved for food contact (U.S. FDA 21 CFR 177.2600(c)(4)(1) listed). FDA compounds are also available in a variety of colors.

Cri-Line™ FKX-719-75

Polymer Name:Fluoroelastomer (FKM)
Processing Methods:Extrusion
Features:High Viscosity

The LS compounds are designed to give part shrinkage (out of the mold) and post-curing operation comparable to a nitrile or similar elastomer. In most cases, tooling changes are not required when switching over to an LS compound. NPC indicates no post cure required to achieve high tensile and modulus values with good compression set and aging characteristics. FKHT is a high temperature resistant, low compression set compound. FKX is a high viscosity, high green strength, black fluorocarbon compound formulated for HAV and / or salt bath curing of O-ring cord and extruded profiles.

Cri-Line™ FKHT-717

Polymer Name:Fluoroelastomer (FKM)
Features:Low Compression Set, Heat Resistance

The LS compounds are designed to give part shrinkage (out of the mold) and post-curing operation comparable to a nitrile or similar elastomer. In most cases, tooling changes are not required when switching over to an LS compound. NPC indicates no post cure required to achieve high tensile and modulus values with good compression set and aging characteristics. FKHT is a high temperature resistant, low compression set compound. FKX is a high viscosity, high green strength, black fluorocarbon compound formulated for HAV and / or salt bath curing of O-ring cord and extruded profiles.

Knowde Brand Summary

Identification

Chemical Family: Fluoropolymers
Polymer Name: Fluoroelastomer (FKM)
Technologies: Elastomers
Product Families: Specialty Elastomers
Fluoroelastomers

Features & Benefits

Labeling Claims: Food Contact Acceptable