Products

LoneLube 100L is the most fully environmentally friendly Modified Natural Base lubricant in the market today. It is designed to reduce torque and drag on the drill string against the well bore and to reduce metal to metal friction in POP type uses. LoneLube 100L is used in most oil-based systems.

SI 500 has very high calcium tolerance with good scale inhibition effects. It is an effective scale inhibitor for a squeeze or continuous treatment of calcium and magnesium carbonate, calcium, strontium, and barium sulfate and iron scales in water system of high temperatures. In addition to being a good scale inhibitor, the product is also an anodic corrosion inhibitor. Thus, it can be used as a scale/corrosion inhibitor for cooling water, boilers, water floods, or drilling system.

The CCT X-40 Gel series is designed as a superior quality Xanthan gum slurry system. Manufactured ussisng high quality Xanthan gum powders and enviromentally-friendly ND BTEX mineral oil, the series is uniquely formulated to meet your needs. With a hydration rate of 25+cP in 3 minutes. CCT X-40 Gel provides rapid hydration with low separation. The CrudeChem formultaed slurry is a 4lb per gallon Xanthan powder, suspended in a high-permonance surfactant, organophilic clay and mineral oil package. Product is typically compatible with fresh water, potassium chloride water, sodium and calcium chloride brines.

Bio-Lube POP (Pipe on Pipe) is a non-petroleum-based Natural Oil Extract with superior bonding capabilities to metal surfaces. It is designed to reduce torque and drag on the drill string against the wellbore and to reduce metal to metal friction in Coiled Tubing applications. Bio-Lube can also be used in most oil-based systems. Bio-Lube POP is completely bio-degradable and easily miscible in water-based and oil-based fluid systems.

MEA 62 is a hydrogen sulfide scavenger for flowline and bubble tower applications. MEA 62 will react rapidly with hydrogen sulfide to form stable, water-soluble products that can be injected down disposal wells. Unlike many conventional scavengers, MEA 62 is unaffected by the presence of carbon dioxide and continues to removes H2S efficiently. Typical field blends may be made by diluting 20-40% with fresh water.

Surf-664 is highly effective dispersant used to remove/inhibit existing paraffin and asphaltene deposits in the formation and increase oil production. Surf-664 is a single solution synergistic blend of surfactants, dispersants and a solvent Surf-664 prevents redeposition in the formation, production tubing and surface equipment. Surf-664 can be injected during fracking to improve production or can be used to treat a unproductive well to bring back the max production. Surf-664 also cleans piping and storage tanks.

CCT-AS40 is a surfactant and solvent blend designed specifically for anti-sludge applications during batch acidizing and acid fracturing. The proprietary formula is an aqueous, biodegradable, ecofriendly solvent blend that is effective across a broad pH range, including 15% Hydrochloric acid. This product is effective in both sandstone and carbonate formations.

SI-700B is a polymeric scale inhibitor blend which has excellent performance in controlling mineral scale such as Calcium Carbonate and Barium Sulfate in downhole and surface conditions. SI-700B will exhibit a degree of adsorption on to rock surfaces, resulting in improved squeeze lifetimes. SI 700B is thermally stable to 400℉ and is not affected by the presence of Iron and other foulants.

CSURF 301 is a nonionic water-soluble durface tension reducer formulates for use in acidizing, well stimulation , and fracturing operations. When used in acidizing the CSURF 301 disperses oils and sludge to provide maximum contacct of acid with formation. The CSURF 301 will serve to break through water blocks and prevent crude oil in water emulsions. The product can be used as a spearhead fluid in acidizing and fracturing treatments to lower the breakdown pressures and minimize the potential for forming water/oil or acid/oil emulsions.

CCT-IC50 is a highly effective iron control chemical designed for application in acidizing and fracturing operations. The product is compatible with all commonly used acid types, such as HCl, HCl/HF and organic acids. The CCT-IC50 rapidly complexes with both ferrous (Fe+2) and ferric (Fe+3) iron present in acidizing treatments to prevent the precipitation of iron sludges in the near well bore and well bore areas. The product is applicable in acidizing treatments to remove down hole deposition of iron and iron sulfide. The CCT-IC50 is nonionic and compatible with all commonly used acidizing additives.

Parahib-2500 is highly effective dispersant used to remove existing paraffin and asphaltene deposits. Parahib-2500 prevents redeposition in the formation, production tubing and surface equipment. Parahib-2500 is the preferred treatment for the most difficult and problematic production systems.

CSURF 364 is an advanced micelle solution for use in hydraulic fracturing. The formulation is designed as a multi-functional additive that performs as both a non-emulsifier and surface active agent. The micelles in CSURF 364 in <100 nm in size, allowing increased penetration into tight formation pore throats.

CrudeChem Technology Citric Acid 35W is used in oil or gas, water treatment.