CTM Coatings

About Us

"CTM Coatings is a leading epoxy and polyurethane construction chemicals manufacturer based in Montreal, Quebec. CTM’s mission is to offer its clients top-quality products with the best possible service and technical support. Our large scale manufacturing facilities and R&D laboratory provide our clients with complete floor coating solutions and systems at the best price point. Since its founding in 2011, CTM adopted a client-centric approach focused on developing specific solutions to ensure that every project meets and exceeds industry standards. CTM Coatings provides an endless amount of choices in products, solutions, systems, finishes and colors."

Browse Products by Market

View All Products

Paints & Coatings

7 products

Automotive & Transportation

6 products

Building & Construction

6 products

Printing & Packaging

4 products

Browse Products by Technology

View All Products

Ready-to-Use Products

15 products

Most Viewed Products

View All Products

CTM Coatings UCT-PU

Ready-to-Use Product Type:2K (2 component) Coating
Compatible Substrates & Surfaces:Wood, Concrete, Masonry
Features:Fast Cure, Good Hiding Power, Good Abrasion Resistance, Chemical Resistant, Good Adhesion, Wide Temperature Operating Range
Chemical Family:Polyureas

CTM Coatings UCT-PU polyurea primer is a two-component, 95% solid, VOC compliant, polyurea hybrid that was developed as a primer/basecoat for a variety of coating systems. It provides outstanding adhesion on many substrates and performs well in a wide range of temperature conditions. This system has been approved by the Canadian Food Inspection Agency (CFIA).

CTM Coatings WECTGF-R

Ready-to-Use Product Type:2K (2 component) Coating, Epoxy Coating, Waterborne Coating, Primer
Compatible Substrates & Surfaces:Masonry, Wood, Concrete
Features:Matte Finish, Bacteria Resistant, Abrasion Resistant, Low VOC, Good Mechanical Properties, Moisture Resistant, Satin Finish, Chemical Resistant
Chemical Family:Epoxy & Epoxy Derivatives

CTM Coatings WECTGF-R is a two-component waterborne epoxy coating system. It is designed according to specific properties required for concrete floors and walls. It provides outstanding appearance and excellent mechanical properties. It can be used as a primer or topcoat on concrete, wood and other materials. This system has been approved by the Canadian Food Inspection Agency (CFIA) and meets LEED requirements.

CTM Coatings WACT 30

Ready to Use Product Type:Sealer
Compatible Substrates & Surfaces:Concrete, Masonry
Features:High Performance, Chemical Resistant, Good Surface Appearance, Good UV Stability, Water-based, Water Resistant, Stain Resistant
Chemical Family:Acrylics & Acrylates

CTM Coatings WACT 30 is a high performance, one component acrylic water-based sealer. It has a gloss finish, is UV stable, and has a good resistance to certain chemicals. WACT-30 is designed to penetrate and seal porous mineral surfaces such as concrete and masonry. It can also be used as a membrane for freshly cured concrete. This product has been approved by the Canadian Food Inspection Agency (CFIA).

CTM Coatings ECTR-VRM

Ready-to-Use Product Type:2K (2 component) Coating, Epoxy Coating
Features:High Performance, Moisture Barrier, Abrasion Resistant, Low VOC, Moisture Resistant, Bacteria Resistant, Durable, Good Adhesion, Chemical Resistant
Chemical Family:Epoxy & Epoxy Derivatives

CTM Coatings ECTR-VRM is a 100% solid, two component epoxy coating designed for controlling the moisture vapor emission rate on deteriorated or new floors. ECT-VRM-2000 provides excellent resistance to abrasion and chemical resistance. ECTR-VRM meets many requirements such as durability, performance as well as esthetics. This system has been approved by the Canadian Food Inspection Agency (CFIA). It meets LEED standards.

CTM Coatings SCT 20

Ready to Use Product Type:Sealer, Solventborne Coating
Compatible Substrates & Surfaces:Masonry, Concrete
Features:Moisture Resistant, Chemical Resistant, Good Surface Appearance, Good Adhesion, Fast Drying, Good Non-Yellowing Properties, Stain Resistant, Bacteria Resistant, Good UV Stability, Water Resistant
Chemical Family:Acrylics & Acrylates

CTM Coatings SCT 20 is a one component acrylic solvent-based sealer. It has a pearl finish, is UV stable, and has a resistance to certain chemicals. SCT 20 is designed to penetrate and seal porous mineral surfaces such as concrete and masonry. It can also be used as a membrane for freshly cured concrete.

CTM Coatings SCT 10

Ready to Use Product Type:Sealer
Compatible Substrates & Surfaces:Concrete, Masonry
Features:Water Resistant, Stain Resistant, Bacteria Resistant, Moisture Resistant, Chemical Resistant, Good Surface Appearance, Good UV Stability, Good Adhesion, Fast Drying, Good Non-Yellowing Properties
Chemical Family:Acrylics & Acrylates

CTM Coatings SCT 10 is a one component acrylic solvent-based sealer. It has a matte finish, is UV stable, and has resistance to certain chemicals. SCT 10 is designed to penetrate and seal porous mineral surfaces such as concrete and masonry. It can also be used as a membrane for freshly cured concrete.

CTM Coatings PACT-8000

Ready-to-Use Product Type:2K (2 component) Coating
Features:Chemical Resistant, Good Gloss Retention, Good Non-Yellowing Properties, Good Adhesion, Low Odor, Good UV Stability, Solvent Resistance, Enhanced Physical Properties, Fast Cure, Good Surface Appearance, UV Resistant
Application Area:Marine Applications
Compatible Substrates & Surfaces:Masonry, Metal, Concrete, Steel, Wood, Fiberglass
Chemical Family:Polyureas

CTM Coatings PACT-8000 is a two-component, 83% solids, VOC compliant, low odor, aliphatic polyaspartic polyurea that was developed for UV stable floor topcoats. It provides outstanding appearance, superior chemical, UV, and solvent resistance. It exhibits excellent physical properties. This system has been approved by the Canadian Food Inspection Agency (CFIA) and meets FDA and USDA requirements.

CTM Coatings WUCTR

Ready-to-Use Product Type:2K (2 component) Coating, Epoxy Coating, Waterborne Coating, Primer
Compatible Substrates & Surfaces:Masonry, Wood, Concrete
Features:Matte Finish, Bacteria Resistant, Abrasion Resistant, Low VOC, Good Mechanical Properties, Moisture Resistant, Satin Finish, Chemical Resistant
Chemical Family:Polyurethanes (PU)

CTM Coatings WUCTR is a two-component waterborne polyurethane coating system. It is designed according to specific properties required for concrete floors and walls. It provides outstanding appearance and hard finish highly resistant to abrasion. It can be used as a primer or topcoat on concrete, wood and other materials. WUCTR is available clear or colored, in a mat, satin or gloss finish. This system has been approved by the Canadian Food Inspection Agency (CFIA). It meets LEED requirements.

CTM Coatings WACT 20

Ready to Use Product Type:Sealer
Compatible Substrates & Surfaces:Concrete, Masonry
Features:High Performance, Chemical Resistant, Good Surface Appearance, Good UV Stability, Water-based, Water Resistant, Stain Resistant
Chemical Family:Acrylics & Acrylates

CTM Coatings WACT 20 is a high performance, one component acrylic water-based sealer. It has a satin finish, is UV stable, and has a good resistance to certain chemicals. WACT-20 is designed to penetrate and seal porous mineral surfaces such as concrete and masonry. It can also be used as a membrane for freshly cured concrete. This product has been approved by the Canadian Food Inspection Agency (CFIA).

View All Products (15)

View All Products