Products

CTM Coatings UCT-PU polyurea primer is a two-component, 95% solid, VOC compliant, polyurea hybrid that was developed as a primer/basecoat for a variety of coating systems. It provides outstanding adhesion on many substrates and performs well in a wide range of temperature conditions. This system has been approved by the Canadian Food Inspection Agency (CFIA).

CTM Coatings ECTR-VRM is a 100% solid, two component epoxy coating designed for controlling the moisture vapor emission rate on deteriorated or new floors. ECT-VRM-2000 provides excellent resistance to abrasion and chemical resistance. ECTR-VRM meets many requirements such as durability, performance as well as esthetics. This system has been approved by the Canadian Food Inspection Agency (CFIA). It meets LEED standards.

CTM Coatings PACT-8000 is a two-component, 83% solids, VOC compliant, low odor, aliphatic polyaspartic polyurea that was developed for UV stable floor topcoats. It provides outstanding appearance, superior chemical, UV, and solvent resistance. It exhibits excellent physical properties. This system has been approved by the Canadian Food Inspection Agency (CFIA) and meets FDA and USDA requirements.

CTM Coatings WACT 30 is a high performance, one component acrylic water-based sealer. It has a gloss finish, is UV stable, and has a good resistance to certain chemicals. WACT-30 is designed to penetrate and seal porous mineral surfaces such as concrete and masonry. It can also be used as a membrane for freshly cured concrete. This product has been approved by the Canadian Food Inspection Agency (CFIA).

CTM Coatings PACT-9500 is a two-component, 95% solids, VOC compliant, polyaspartic coating that was developed as a low odor topcoat. The product contains a UV protector. It provides a glossy finish with superior chemical resistance. It exhibits excellent physical properties. This system has been approved by the Canadian Food Inspection Agency (CFIA).

CTM Coatings SCT 30 is a one component acrylic solvent-based sealer. It has a gloss finish, is UV stable, and has a resistance to certain chemicals. SCT 30 is designed to penetrate and seal porous mineral surfaces such as concrete and masonry. It can also be used as a membrane for freshly cured concrete.

CTM Coatings UCTR-4950 is a two-component, high solids, UV stable moisture-cure polyurea topcoat. It provides a high-gloss finish with superior chemical resistance. It exhibits excellent physical properties and is designed to withstand industrial traffic. It can be applied over an epoxy-primer or used to re-coat existing epoxy or urethane floor.

CTM Coatings WACT 20 is a high performance, one component acrylic water-based sealer. It has a satin finish, is UV stable, and has a good resistance to certain chemicals. WACT-20 is designed to penetrate and seal porous mineral surfaces such as concrete and masonry. It can also be used as a membrane for freshly cured concrete. This product has been approved by the Canadian Food Inspection Agency (CFIA).

CTM Coatings WECTGF-R is a two-component waterborne epoxy coating system. It is designed according to specific properties required for concrete floors and walls. It provides outstanding appearance and excellent mechanical properties. It can be used as a primer or topcoat on concrete, wood and other materials. This system has been approved by the Canadian Food Inspection Agency (CFIA) and meets LEED requirements.

CTM Coatings SCT 10 is a one component acrylic solvent-based sealer. It has a matte finish, is UV stable, and has resistance to certain chemicals. SCT 10 is designed to penetrate and seal porous mineral surfaces such as concrete and masonry. It can also be used as a membrane for freshly cured concrete.

CTM Coatings WUCTR is a two-component waterborne polyurethane coating system. It is designed according to specific properties required for concrete floors and walls. It provides outstanding appearance and hard finish highly resistant to abrasion. It can be used as a primer or topcoat on concrete, wood and other materials. WUCTR is available clear or colored, in a mat, satin or gloss finish. This system has been approved by the Canadian Food Inspection Agency (CFIA). It meets LEED requirements.

CTM Coatings SCT 50 is a one component acrylic solvent-based sealer. It has a glaze finish, is UV stable, and has a resistance to certain chemicals. SCT 50 is designed to penetrate and seal porous mineral surfaces such as concrete and masonry. It can also be used as a membrane for freshly cured concrete.

CTM Coatings SCT 20 is a one component acrylic solvent-based sealer. It has a pearl finish, is UV stable, and has a resistance to certain chemicals. SCT 20 is designed to penetrate and seal porous mineral surfaces such as concrete and masonry. It can also be used as a membrane for freshly cured concrete.

CTM Coatings ECTR-MVB is a 100% solid, two component epoxy coating, designed for controlling the moisture vapor emission rate on deteriorated or new floors. ECTR-MVB meets ASTM F3010 product requirements for vapor permeance when applied at a thickness of 18 mils. The coating will control moisture vapor emission rates up to 25 lb. /24 hr. /1000 square feet. ECTR-MVB provides excellent resistance to abrasion and chemical resistance and meets many requirements such as durability, performance as well as esthetics. This system has been approved by the Canadian Food Inspection Agency (CFIA) and meets LEED standards.

CTM Coatings WECT-DP is a two-component deep penetrating waterborne epoxy primer. We recommend using WECT-DP for all our epoxy ECTR systems as a primer to maximize adherence of topcoats.