Products

FluoroSyl is triethoxysilane terminated, bifunctional perfluoropolyether (PFPE) designed as a low surface energy treatment for glass, siliceous surfaces, metals, and other substrates that have hydroxyl (–OH) groups on the surface. FluoroSyl is a hydrophobic and oleophobic coating. FluoroSyl provides long-lasting, antifouling, anti-fingerprint, and anti-smudge properties. FluoroSyl 880 is a good replacement for Fluorolink S10.

FluoroSyl 3750 is hydrophobic and oleophobic perfluoropolyether derivatives. These coatings provides long-lasting, anti-fouling, anti-fingerprint and anti-smudge properties to properly cleaned surfaces. FluoroSyl bonds to glass, plastic and metal surfaces. This produces an easy-to-clean, low surface energy, low refractive index, transparent, oil, water and stain repellent coating that is less than 10 nanometers thick.

FluorAcryl 7298 is a perfluoropolyether (PFPE) used as an additive in other UV curable coatings to reduce surface tension and improve water, oil and stain resistance. Films and coatings with 7298 may be expected to provide anti-fouling and easy cleaning from fingerprints and other contaminants. FluorAcryl 7298 is compatible with many monomers, such as TMPTA. With or without pigments and other particulates, 7298 rapidly UV cures in the presence or absence of oxygen.

FluoroSyl™ 3750 is an antifouling coating that repels water, oil, foods and fingerprints.

FluoroTac is a clear Perfluoropolyether pressure sensitive adhesive in a low boiling point fluorinated solvent. Films 3 to 4 mills thick dry in minutes under ambient conditions to a moderate tac. FluoroTac is resistant to UV light and non-fluorinated solvents. Films have excellent adhesion to most substrates, including PTFE. The FluoroTac use temperature range is -160°F to 140°F.

Cytonix FluoroPel 420-F25M is an innovative fluoro-polymer based conformal coating that protects electronic components from chemicals and humidity based corrosion. Electrical component are expected to withstand a very wide variety exposures and conditions.

FluorN 2900 is a 100% active, non-ionic, alkylphenolethoxylate-free (APEO), PFOA/PFOS-free, perfluoropolyether (PFPE) fluoro-surfactant that at low concentration reduces the surface tension of aqueous and polar solvent formulations sufficiently to permanently wet and provide smooth, pinhole-free films on PTFE and other low energy surfaces. FluorN 2900 provides for excellent substrate wetting, leveling, stripping, re-coating, anti-fogging, anti-blocking, cleanability, and open time extension. In aqueous and polar solutions, it is low or non-foaming.

FluorN 1740G is a fluorosurfactant additive that provides low surface tension in solvent-based products, enabling better wetting, spreading, leveling and other beneficial properties in coatings, paints, inks, cleaning products, conditioners, polishers, etc. At very low concentrations, FluorN 1740G can deliver great wetting power.

FluoroCoat MH, S and U-series thixotropic inks are screen printable coatings used in manufacturing hydrophobic and super-hydrophobic diagnostic microscopy slides, microarray plates and microfluidic devices. The MH-series inks are PTFE-based, heat-curable, super-hydrophobic and solvent resistant. The S-series inks are smooth and hydrophobic. U-series inks are screen-printable UV-light curable inks that are water, oil and chemicals repellent. FluoroCoat series inks are translucent or pigmented. After proper curing, masks have contact angles to water between 115 - 150° and have great chemical and solvent resistance. These inks are available in a wide variety of colors including black, white, red, blue, yellow and a wide variety of others. Custom color-matching and optimization for other properties is also offered when needed.

FluorAcryl 1939 is a bifunctional perfluoropolyether (PFPE) urethane acrylate. FluorAcryl is a surface modifier that improves gloss. It is compatible and miscible with low molecular weight reactive UV-curable diluents and acrylic monomers. Some of the properties of FluorAcryl 1939 include good release agent, good water and oil repellency and good chemical resistance. As a surface modifier this also offers good hardness, substrate-wetting and flow-properties. Recommended dosage is between 0.5–5% w/w. During application and UV light curing, FluorAcryl blooms quickly and effectively on the surface of the coating, imparting low surface energy and non-stick E2C properties. FluorAcryl is made for UV curable coatings use.