Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
Quick & Easy to Use:
Cleans, disinfects, and deodorizes in one step.
Versatile:
Cleans soap scum and hard water scale from showers, toilets, and other non-porous surfaces.
Economical:
The clinging foam reduces labor and over-use of the product.
Creates a Healthy Environment:
Prevents cross-contamination by bacteria, viruses and fungi such as staph. aureus, HIV, Herpes simplex 1 & 2 and athlete’s foot.
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Application
Daco® One-Step - Shower Disinfectant Cleaner is designed for removing soap scum, body oils, and mineral deposits from showers without scouring. It provides hospital grade disinfection as it cleans. Daco® One-Step - Shower Disinfectant Cleaner will work very well in industrial shower rooms where a clean environment promotes good worker morale. It lessens cross-contamination of germs and athletes foot fungus reducing sick-time. Daco® One-Step - Shower Disinfectant Cleaner will provide these benefits in schools and colleges, protecting the students against the unseen elements found in showers and bathrooms. Daco® One-Step - Shower Disinfectant Cleaner is perfect for hospitals and nursing homes because the showers can be cleaned quickly and disinfected efficiently with one product. This creates a labor savings while providing a healthier environment for residents and patients. Daco® One-Step - Shower Disinfectant Cleaner works well in health clubs and country clubs where image and appearance are very important. Using Daco® One-Step - Shower Disinfectant Cleaner on a regular basis in the showers and restrooms will help develop a positive on-going membership.
- Applications
Directions:
Apply to bathtubs, shower stalls, urinals, toilet bowls, walls, floors, and other nonporous inanimate surfaces (such as metal, stainless steel, glazed porcelain, ceramic, and plastic) thoroughly wetting the surfaces. Daco One-Step can be applied with a foaming sprayer, squirt cap, sponge, cloth, bowl mop or used for soaking. To avoid inhaling excessive mist use a foaming trigger sprayer or at least use a very coarse spray.
Cleaning and general disinfection:
Add 3 oz. per gallon of water and apply. Scrubbing is usually not needed except for heavy build-up. Surfaces must remain wet for 10 minutes for disinfection. Always rinse after the 10 minutes to prevent the drying product from hazing or dulling of shiny surfaces. Surfaces may be wiped dry to eliminate water spots. (For water hardness above 250 ppm, dilute at 4 oz. per gallon of water.) If using for daily cleaning do not exceed the recommended dilution rates to avoid harming grout.
Toilet bowls:
With standing water, put 3 oz. of concentrate in the bowl and mix. Brush thoroughly around the bowl and under the rim. Allow to stand for at least 10 minutes for disinfection, then flush.
- Application Options
Showers:
Daco® One-Step - Shower Disinfectant Cleaner works very well through a hoseconnected foaming sprayer for use on large vertical surfaces such as shower walls and large tiled bathroom areas. Pour the concentrate into the container. Set the tip at 3 oz. per gallon and hook-up the water supply hose. Spray all surfaces with the foam. Allow to set for 10 minutes for total disinfection as well as cleaning. Then rinse.
Fixtures:
Daco® One-Step - Shower Disinfectant Cleaner works well as a total bathroom cleaner for toilet bowls and fixtures. Apply diluted product to the sinks, urinals, and toilets utilizing a bottle equipped with a foaming trigger sprayer. For toilets you can attach a flip-top cap on the spray bottle for applying the solution under the rim. For total disinfection allow solution to set for 10 minutes. Then rinse.
Non Porous Surfaces:
Daco® One-Step - Shower Disinfectant Cleaner can be sprayed on any nonporous surface with a spray bottle equipped with a foaming sprayer. A misting sprayer can be used, but it uses much more product and may create excessive mist in the air. Allow to set for 10 minutes for disinfection. Then rinse
Floors:
Daco® One-Step - Shower Disinfectant Cleaner can be used on ceramic tile floors where you would need a heavy cleaner for cleaning grout and surface buildup. Apply to the surface with a mop, agitating tough soil and buildup. Allow to set for 10 minutes for disinfection. Then rinse.
Properties
- Physical Form
Regulatory & Compliance
- Chemical Inventories