Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
This resin is suitable for a range of film applications such as shopping bags or food packaging.
- Plant trays
- Food service ware (plates, trays, lids)
- Paint trays
- Applications
This resin is suitable for a range of film applications such as shopping bags or food packaging.
- Plant trays
- Food service ware (plates, trays, lids)
- Paint trays
Properties
- Typical Properties
- Note
Material properties measured on injection molded samples. These values are to be considered as typical values and are not to be construed as specifications.
- Note
Material properties measured on injection molded samples. These values are to be considered as typical values and are not to be construed as specifications.
| Value | Units | Test Method / Conditions | |
| Elongation (at Break) | 6 - 7 | % | ASTM D-638 |
| Heat Deflection Temperature (at 0.455 MPa) | 101.9 - 102.1 | °C | — |
| Heat Deflection Temperature (at 1.8 MPa) | 65.7 - 70.3 | °C | — |
| Melt Flow Rate (at 175°C, 10,000 g) | 15 - 40 | g/10 min | ASTM D-1238 |
| Notched Izod Impact | 4.8 | J/m | ASTM D-256 |
| Flexural Modulus | 855 - 945 | MPa | ASTM D-790 |
| Flexural Strength | 10.8 - 11.2 | MPa | ASTM D-790 |
| Tensile Strength (at Break) | 26.3 - 27.5 | MPa | ASTM D-638 |
| Tensile Modulus | 1174 - 1326 | MPa | ASTMD-638 |
| Tensile Strength (at Yield) | 27 - 28.2 | MPa | ASTM D-638 |
Regulatory & Compliance
- Certifications & Compliance
- Certifications & Regulatory Status
Certifications apply to the resin only. Customer required to certify their own parts to make claims about renewability and biodegradability.
- Certifications & Regulatory Status
Certifications apply to the resin only. Customer required to certify their own parts to make claims about renewability and biodegradability.