Products

DCL 329-A Chromium Oxide Green, PG.17 (medium shade, G5099 type) is a high-quality, clean, medium-shade, very stable green pigment that is unaffected by acids, alkalis and solvents. 329-A is heat stable and offers excellent value, lightfastness, and weatherability. FDA-approved (Section 178.3297).

DCL 1219 Quinacridone Red Violet, PV.19 (E5B type) is a bright, yellow shade quinacridone with excellent overall properties. This pigment is FDA approved (Section 178.3297) and finds major applications in the following: Plastics such as PVC, PP, PS, PE and PET. Automotive/aerospace, decorative, powder and industrial coatings. Solvent flexo, water flexo, inkJet, UV and offset inks

DCL 386 Chromium Oxide Green, PG.17 (extra dark/camouflage) is a dark, stable green pigment that is unaffected by acids, alkalis, and solvents. It is heat stable and offers excellent lightfastness, weatherability, and high reflectivity in the infrared range, making it ideal for military and camouflage applications.

DCL 7036 Benzimidazolone Orange, PO.36 is a vibrant, reddish-orange pigment specifically designed for high-grade industrial coatings, automotive refinishing, and coil coatings. With excellent weather fastness and heat stability, it is an ideal replacement for molybdate orange. DCC Orange 7036 provides a cost-effective, lead-free alternative to molybdate orange for various applications.

DCL 7136 Benzimidazolone Orange, PO.36 is a high-performance blue-shades orange pigment for use in high-end coating applications. It can be used in all coatings, but is recommended for the highest-end coating applications, where excellent weather fastness, heat stability, chemical resistance, rheology, and dispersion are required.

DCL 1144 Disazo Red, PR.144 is a medium to slightly blue-shade red pigment with high purity, tinting strength, and excellent heat stability. It is primarily used in the coloration of plastics such as PVC, ABS, polystyrene, polyolefins, and polyester spin dyeing, and is also used in some specialty coatings and inks, though it can cause warpage in HDPE.

DCL 7354 DPP Red, PR.254 is a yellow-shaded DPP that offers excellent opacity, high color saturation, weather resistance, heat stability, acid, alkali, and solvent resistance. It is recommended for high-end coatings and high-end plastics applications, and is FDA compliant for indirect food contact plastic applications.

DCL 1177 Anthraquinone Red, PR.177 is a transparent, non-warping, blue-shaded red with excellent fastness properties. It is FDA-approved (Section 178.3297) and can be used in a variety of plastics, including polyolefins and PVC, as well as PET, ABS, rubber, and styrene. Additionally, it is suitable for general industrial coatings and automotive applications.

DCL 361 Chromium Oxide Green, PG.17 (dark shade) is a dark shade of very stable green pigment that is unaffected by acids, alkalis and solvents. 361 is heat stable and offers excellent value, lightfastness, and weatherability. It is FDA-approved (Section 178.3297) and is recommended for coatings, plastics and for use in the construction industry primarily for architectural applications.

DCL YE941 Molybdate Orange, PR.104 is a standard yellow shade molybdate orange that exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of coating and plastic applications.

DCL 1166 Disazo Scarlet, PR.166 is a transparent, yellow-shaded red with excellent heat stability and very good fastness properties. It is recommended for auto refinishes, solvent industrial coatings, and powder coating applications. It is also recommended for all ink and plastic applications.

DCL 1370 Naphthol Red, PR.170 is a very bright, yellow-shaded naphthol red with very good lightfastness, opacity, flow properties, and chemical resistance. The shade of 1370 is yellower and more opaque compared to that of 1970A. It is a reliable and versatile choice for various plastic, ink and coating applications.

DCL 7254 DPP Red, PR.254 (BO type) is a medium red shade DPP pigment that offers excellent masstone weather fastness, heat stability, acid, alkali and solvent resistance. It is recommended for high-end coatings and high-end plastics applications, especially exterior uses where excellent fastness properties are required. Moreover, this pigment is FDA-approved.

DCL 7336 Benzimidazolone Orange, PO.36 is a high performance blue shade orange pigment, ideal for use in high-end coating applications that require excellent weather fastness, heat stability, chemical resistance, rheology, and dispersion. It is suitable for use in all coatings but is particularly recommended for the most demanding applications.

DCL HRO Diarylide Yellow, PY.83 has good weathering durability, fastness to heat, solvents, and acids/alkalis, as well as excellent opacity. This makes it a cost-effective choice for industrial fast-drying and oven-cured coatings to achieve mid- to red-shaded saturated yellows, making it an ideal alternative for medium chrome pigments.

DCL 1372 DPP Flame Red, PR.272 is a bright, opaque, slightly yellow shade red pigment that stands out as an offset to the industry standard. It boasts excellent overall properties. This pigment finds major applications in the following: Plastics such as PVC, PE and PP Automotive/aerospace, industrial, powder coatings Water flexo, solvent flexo and inkjet inks

DCL 2870 Naphthol Red, PR.170 is a blue-shaded red pigment for use where good overall fastness properties are required. It exhibits good overall resistance properties, including lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of paint, plastic, and ink applications.

DCL 1419 Quinacridone Violet, PV.19 is a bright, blue-shaded quinacridone with a similar shade to thioindigo red, and it has excellent overall properties. This pigment is FDA-approved (Section 178.3297) and is recommended for use in inks, high-grade industrial paints, implement enamels, agricultural equipment, and powder coating applications.

DCL 333 Chromium Oxide Green, PG.17 (medium shade, G5099 type) is a high-quality, clean, light-to-medium-shade, very-stable green pigment that is unaffected by acids, alkalis, and solvents. It is heat-stable, offers excellent value, lightfastness, and weatherability, and is FDA-approved (Section 178.3297).

DCL 1146 Naphthol Red, PR.146 is a blue-shaded, semi-transparent naphthol red with good overall fastness properties. This pigment is a possible alternative to pigment red 57:1 types where an improvement in fastness properties is needed. It is mainly used in various types of coatings, inks, and papers.

DCL 1242L Disazo Scarlet, PR.242 is a yellowish shade, red pigment with excellent fastness properties. It shows excellent resistance against ethanol and water. It is mainly applicable in Plastics such as PVC, PE, PP, PS and fiber. Automotive/aerospace, industrial and powder coatings. Solvent flexo and water flexo inks etc.

DCL 2792 Metal Azo Red, PR.48:4 is a very intense, medium performance blue shade red pigment, designed to be yellower in shade than DCC Red 2790. It is laked with manganese, which improves its stability, resistance properties, and increases its chroma, opacity, and gloss. Its good to excellent solvent resistance makes it well-suited for fast air drying and oven-cured industrial applications.

DCL 1179 Perylene Red, PR.179 is a semi-transparent maroon shade with excellent fastness properties and is FDA-approved (Section 178.3297). It is primarily recommended for higher-quality industrial coatings, automotive OEM and refinishes, and plastics such as polyolefins, PVC, and PUR, and may also be suitable for styrene and other polymers.

DCL YE998 Molybdate Orange, PR.104 is a pre-darkened blue-shaded molybdate orange pigment with stir-in properties used in coating and plastic applications. It has overall good resistance properties and is restricted to industrial and professional inks, coatings, plastics, and roadmarking applications (subject to regional legislation).

DCL 7154 Benzimidazolone Yellow, PY.154 is a high-performance green-shade yellow pigment that is slightly redder than PY. 151 lemon. This product has excellent weatherability and resistance to heat (200°C/10min), chemicals, and solvents, making it suitable for automotive, industrial, powder, and agricultural coatings. It meets the required color and performance properties for this pigment chemistry.

DCL 1970-A Naphthol Red, PR.170 is a bright, blue-shaded naphthol red with good overall properties. It has a wide range of applications, including in plastics such as PVC and PE, as well as decorative, powder, and industrial coatings. It is also used in solvent flexo, inkjet, offset, and UV inks.

DCL 7754 Benzimidazolone Yellow, PY.154 is a high-performance green-shade yellow pigment that is slightly redder than PY. 151. It is slightly greener than DCC Yellow 7154, extending the color gamut achievable and providing excellent weatherability and resistance to chemicals and solvents. This makes it suitable for architectural, automotive, industrial, powder, and agricultural coatings due to its durability.

DCL 301 Chromium Oxide Green, PG.17 (light shade, G4099 type) is a high-quality, clean, yellow-shade, very-stable green pigment that is unaffected by acids, alkalis, and solvents. It is heat-stable, offers excellent value, lightfastness, and weatherability, and is FDA-approved (Section 178.3297).

DCL 2443 Vat Orange, PO.43 is a bright, high-chroma orange pigment with excellent overall properties and high tint strength, suitable for nearly all types of coatings and plastics applications. It can be used to formulate pastel colors and for shading as well as creating copper metallic shades; however, full shade applications may have a tendency to darken upon exposure.

DCL 1176 Benzimidazolone Red, PR.176 is a transparent, bright, blue-shaded red with good overall fastness properties. The product has a wide range of applications, including its use in plastics such as PVC, PP, PS and PE, as well as in powder and industrial coatings. Additionally, it is also used in solvent flexo and inkjet inks.

DCL 1229 Quinacridone Magenta, PR.122 (Blue shade) is a standard magenta shade PR 122 that exhibits all the typical properties of quinacridone pigments. It is a low-warpage pigment, recommended for plastics, coatings, and inks, and finds a wide range of applications in coatings, such as trade sales, automotive, agricultural equipment, architectural paints, and industrial finishes. Its excellent heat stability and exterior durability make it suitable for use in various polymeric resin systems, such as polyolefins, polystyrene, polycarbonate, and ABS.

DCL A2RX Indanthrone Blue, PB.60 is a highly saturated, red-shaded blue that offers excellent tinctorial and fastness properties. It is highly transparent and suitable for opaque and effect shades, and especially recommended for high-quality automotive coatings, laminates, specialty coatings, and inks.

DCL 7194 Benzimidazolone Yellow, PY.194 has good weathering durability, very good fastness to heat, solvents, and acid/alkali, a clean shade, and a high tint strength to cost ratio. This makes it a cost-effective choice for many industrial coating applications, allowing for the formulation of alternatives to lead chrome pigments.

DCL 7222 Quinacridone Magenta, PR.122 is a highly versatile pigment suitable for use in coatings, inks, and plastic applications. This blue-shaded red pigment is FDA-approved and offers a clean, vibrant shade with excellent fastness properties. Widely used for shading other reds, creating special-effect metallic finishes, and formulating pinks, PR.122 is the basis for the magenta colorant worldwide and is employed in virtually all machine tinting systems, both architectural and industrial.

DCL Orange GX Pyrazolone Orange, PO.13, is an orange pigment that provides a bright red shade of orange, commonly used in offset and aqueous inks. Additionally, DCL Orange GX is versatile enough to be used in a wide range of paint and plastic applications.

DCL 2188 Naphthol Red, PR.188 is a bright, yellow-shaded naphthol red with good flow properties, bleed resistance, lightfastness, and weather fastness. It is recommended for higher-grade exterior industrial paints, exterior trade sales coatings, colorant systems for in-plant tinting or machine colorants, printing inks, mass coloration of paper, paper surface coating, paper pulp coloration, wax crayons, and inks for wallpaper use. It is also recommended for use in plastics.