Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Application Method
- Applications
The DayGlo SRX latex paint can be used anywhere that requires a high visibility brushing paint. Some of the general areas of use include:
Theatrical and Special Effects: For use in haunted houses and stage painting. They can also be used to create 3-D images.
Graphic Arts: For outdoor advertising signs, murals, painted bulletins, store signs, truck signs, and trade exhibits.
Safety: For aviation, industrial and marine uses on aircraft, ground support equipment, navigational aids, safety markings, equipment, machinery, fire protection equipment, first aid kits, traffic controls, boats, buoys, docks, and life-saving equipment.
Hobby-Sports: For use on models and toys, markings on easily lost sporting equipment (boomerangs, arrows, fishing gear) and identification markings on personal equipment- General Application Instructions
Undercoat:
DayGlo SRX latex paints are semi-transparent and, therefore, brightest when applied over a clean, white surface. White semi-gloss latex coatings, flat white latex undercoaters, water based primersealers and water-based bulletin blockout whites are ideally suited for this purpose. Over old finishes, clean and sand before applying a white undercoat or primer that offers good adhesion to both the old finish and new DayGlo paint. However, best performance can be achieved by removing old finishes and starting with a freshly primed surface.SRX Latex Paint Color Coat:
- Stir well and if thinning is necessary, use water. (AVOID OVER THINNING).
- Apply one heavy coat of DayGlo SRX latex paint with a soft brush. Use short strokes. Cover completely and smooth out as you go to produce a uniform deep layer (approximately 1.5 mils thick dry). Keep in mind that thin spots or streaks will fade prematurely. Allow to set-up or "top dry" at least 10 minutes (@ 70oF).
- Apply the second coat same as the first. Allow 3 hours to dry before applying DayGlo SRX Filteray W overcoat.
- For sign applications, the DayGlo SRX coat can simply be roughed in, slightly overlapping the copy line. Your copy line will not be hidden because DayGlo SCR paint is semitransparent. Do not try to work the paint exactly to a line. An opaque background should be used to cut in accurately to the copy line for sharp detail after the DayGlo SRX paint has top dried 24 hours.
Properties
- Color
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Grind | min. 5 | — | Hegman gauge |
| Viscosity (at 77ºF) | 1,500 - 2,500 | cPs | — |
| pH Value | 8.00 - 9.00 | — | — |
Regulatory & Compliance
- Chemical Inventories