Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Pigment Type
- CASE Ingredients Functions
- Technologies
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Coating Type
- Ink & Toner Type
- Viscosity Control
Formulations based on SPL-N Dispersions are designed to be thinned with water only. Formulations may tolerate small quantities of alcohols but levels should be kept below 5%. Testing should be conducted when solvents are used to determine their affects on the final application formulas.
Viscosity can be increased with the use of Joncryl 142 or a similar product. The addition of 5% of Joncryl 142 will increase viscosity approximately 20 seconds/#2 Zahn cup. Testing should be conduct with each thickener to determine their affects on the final application formulas.
Properties
- Color
- Physical Form
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Brookfield Viscosity (25ºC,RVT #1, 20 RPM) | 100 - 300 | cPs | — |
| Particle Size | 0.25 - 0.45 | micron | — |
| Percent Solid | 46 - 50 | % | — |
| Specific Gravity | 1.0 - 1.1 | — | — |
| Surface Area | 15 - 25 | square meters/gram | — |
| pH Value | 7.5 - 8.5 | — | — |
Packaging & Availability
Storage & Handling
- Handling
- SPL-N Dispersions are liquid products, which offer easy incorporation into aqueous systems with minimal mixing. These products are not compatible with non-aqueous formulations.
- The SPL-N Dispersions should be mixed before use to ensure homogeneity. The pH of the SPL-N should be adjusted to a minimum of 7.5 before use with other ingredients to avoid shocking the ink or coating system.
- These products are for industrial use only. Avoid contact with skin and eyes. Do not swallow. Use appropriate respirator if the product forms mists.