Products

DayGlo NX-C pigments are high strength colorants formulated specifically for blow molding applications. They exhibit low blow pin plateout. High pigment loadings are easily achieved with this coarse particle size form.

Gem-Tone GC26F Crimson Red is a rich, strong blue shade red colorant intended for use in clarified polypropylene. Clean, haze free, non-warping color formulations can easily be achieved with the use of this colorant. No blooming or plate-out problems will be seen with Gem-Tone colorants. These materials can be incorporated into polyolefin resins at levels as low as 0. 05% and can be increased to higher levels to achieve your desired effect. Gem-Tone GC26F is FDA compliant for use in PP at levels NTE 0. 15%.

GloPrill® is the highest-performing fluorescent colorant developed for use in polyolefins with the masterbatch/color concentrate producer in mind. GloPrill® will eliminate your plateout problems. Formulators will be able to easily double their loading levels and cut your through-put time in half. GloPrill® is formaldehyde and dust free. Use as a replacement for melt-in colorants for custom color matches.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

DayGlo NX-C pigments are high strength colorants formulated specifically for blow molding applications. They exhibit low blow pin plateout. High pigment loadings are easily achieved with this coarse particle size form.

GloPrill® is the highest-performing fluorescent colorant developed for use in polyolefins with the masterbatch/color concentrate producer in mind. GloPrill® will eliminate your plateout problems. Formulators will be able to easily double their loading levels and cut your through-put time in half. GloPrill® is formaldehyde and dust free. Use as a replacement for melt-in colorants for custom color matches.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

NG-880 is a Zinc Sulfide compound that responds quickly to excitation by daylight, incandescent, fluorescent or ultraviolet lights. This pigment emits a bright Green phosphorescence shade. It exhibits high initial brightness and afterglow. The afterglow effect is dependent on pigment concentration, surface area and amount of radiant energy absorbed.

DayGlo NX-C pigments are high strength colorants formulated specifically for blow molding applications. They exhibit low blow pin plateout. High pigment loadings are easily achieved with this coarse particle size form.

GloPrill® is the highest-performing fluorescent colorant developed for use in polyolefins with the masterbatch/color concentrate producer in mind. GloPrill® will eliminate your plateout problems. Formulators will be able to easily double their loading levels and cut your through-put time in half. GloPrill® is formaldehyde and dust free. Use as a replacement for melt-in colorants for custom color matches.

GloPrill® is the highest-performing fluorescent colorant developed for use in polyolefins with the masterbatch/color concentrate producer in mind. GloPrill® will eliminate your plateout problems. Formulators will be able to easily double their loading levels and cut your through-put time in half. GloPrill® is formaldehyde and dust free. Use as a replacement for melt-in colorants for custom color matches.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

DayGlo NX-C pigments are high strength colorants formulated specifically for blow molding applications. They exhibit low blow pin plateout. High pigment loadings are easily achieved with this coarse particle size form.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Gem-Tone GC17F Citrine Yellow is a rich, strong green shade yellow colorant intended for use in clarified polypropylene. Clean, haze free, non-warping color formulations can easily be achieved with the use of this colorant. No blooming or plateout problems will be seen with GemTone colorants. These materials can be incorporated into polyolefin resins at levels as low as 0. 05% and can be increased to higher levels to achieve your desired effect. Gem-Tone GC17F Citrine Yellow is FDA approved for use in PP at levels NTE 0. 25%.

NG-200 is a Zinc Sulfide compound that responds quickly to excitation by daylight, incandescent, fluorescent or ultraviolet lights. This pigment emits a bright Green phosphorescence shade. It exhibits high initial brightness and afterglow. The afterglow effect is dependent on pigment concentration, surface area and amount of radiant energy absorbed.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

GloPrill® is the highest-performing fluorescent colorant developed for use in polyolefins with the masterbatch/color concentrate producer in mind. GloPrill® will eliminate your plateout problems. Formulators will be able to easily double their loading levels and cut your through-put time in half. GloPrill® is formaldehyde and dust free. Use as a replacement for melt-in colorants for custom color matches.

Gem-Tone GC19XPF Sapphire Blue is a transparent colorant (prill form) intended for use in clarified polypropylene. Clean, haze free, non-halogenated, non-warping color formulations can easily be achieved with the use of this colorant. No blooming or plateout problems will be exhibited with Gem-Tone colorants. GC19XPF Sapphire Blue is FDA approved for use in PP and has recommended use @ 1% LDR (NTE 9%).

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

GloPrill® is the highest-performing fluorescent colorant developed for use in polyolefins with the masterbatch/color concentrate producer in mind. GloPrill® will eliminate your plateout problems. Formulators will be able to easily double their loading levels and cut your through-put time in half. GloPrill® is formaldehyde and dust free. Use as a replacement for melt-in colorants for custom color matches.

Gem-Tone GC18XPF Emerald Green is a transparent green colorant intended for use in clarified polypropylene. Clean, haze free, non-halogenated, non-warping color formulations can easily be achieved with the use of this colorant. No blooming or plateout problems will be exhibited with Gem-Tone colorants. GC18XPF Emerald Green is FDA approved for use in PP and has recommended use @ 1% LDR (NTE 9%).

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

DayGlo NX-C pigments are high strength colorants formulated specifically for blow molding applications. They exhibit low blow pin plateout. High pigment loadings are easily achieved with this coarse particle size form.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

GloPrill® is the highest-performing fluorescent colorant developed for use in polyolefins with the masterbatch/color concentrate producer in mind. GloPrill® will eliminate your plateout problems. Formulators will be able to easily double their loading levels and cut your through-put time in half. GloPrill® is formaldehyde and dust free. Use as a replacement for melt-in colorants for custom color matches.

DayGlo offer both fluorescent and non fluorescent dyes for plastics. DayGlo's dyes are cost effective alternatives to using pigments when applied in polystyrene and many other engineering resins.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

GloPrill® is the highest-performing fluorescent colorant developed for use in polyolefins with the masterbatch/color concentrate producer in mind. GloPrill® will eliminate your plateout problems. Formulators will be able to easily double their loading levels and cut your through-put time in half. GloPrill® is formaldehyde and dust free. Use as a replacement for melt-in colorants for custom color matches.